A 19-foot Genie scissor lift typically weighs between 2,600 – 2,800 pounds. This includes the lift itself and all of its components. Depending on the type of lift and its accessories, the exact weight may vary slightly, but will typically remain in the same range.
It’s important to pay attention to the weight capacity of the lift, as you don’t want to overload it with more weight than it can support.
How much does a Skyjack 4632 weight?
The Skyjack 4632 scissor lift has an overall weight of 4,654 lbs (2,109 kg). It consists of two components – the stowed weight and the platform capacity. The stowed weight is approximately 4,300 lbs (1,950 kg), and the platform capacity is 350 lbs (158 kg).
This is the maximum combined weight rating on the platform, and it must be taken into account when planning any lift. Additionally, the Skyjack 4632 has a 40% gradeability rating, which means it can be operated on slopes up to 40% in order to reach elevated workspaces.
How high does a Genie GS-1930 go?
The Genie GS-1930 has a maximum working height of 19 feet and a maximum platform height of 13 feet. Its platform capacity is 500 pounds (226.8 kg), and it has a lift speed of 24 feet/minute when carrying a load.
It also has non-marking polyurethane tires and omnidirectional steer for easy maneuverability. When moving the unit on a level surface, you can use the manual drive controls to move around. The Genie GS-1930 is well-suited for tight spaces and is light enough to transport from one job site to another.
What does a genie lift weight?
A genie lift is a type of aerial work platform (AWP) designed for material handling, painting, and installation purposes. The lift is usually operated by an experienced operator and can lift up to 1,400 pounds.
Genie lifts have been designed to reach almost any height with its smooth, maneuverable, and self-leveling mast system. It has a maximum reach of 41 feet, can lift 1.4 tons and can drive on slopes up to 25% grades.
Genie lifts are modular, versatile, and safe, allowing the operator to reach into tight spaces and operate in a variety of positions including upward and downward ramps. It has a light-weight, easy-to- pull design with cushion-tired wheels and non-marking tires that provide a 360 degree maneuverability and a turning radius of 7 feet.
Furthermore, Genie lifts are equipped with a variety of safety features and can be operated with either a manual or an electric control box.
How do you calculate scissor lift load?
Calculating a scissor lift load requires considering three factors: weight distribution, lift capacity, and load center. First, the weight distribution of the load should be determined. This can include determining whether the load is a single-point lift or balanced on multiple points.
Once the weight distribution has been determined, the lift capacity can be calculated. The capacity is generally calculated as the amount of weight that the scissor lift can support at the highest point of the lift.
Finally, the load center must be considered. This is the distance at which the load must be located in order to stay within the lift’s load carrying capacity. Generally, the load center should be placed as close to the center of the lifts platform as possible in order to ensure that the stresses of the load are evenly distributed, reducing the potential for any type of damage.
Once all three of these factors are considered, a safe capacity for the scissor lift can be calculated.
What is the maximum height of a scissor lift?
The maximum height of a scissor lift depends on its type and size. Lightweight scissor lifts are generally able to reach up to 20ft in height, whereas mid-size scissor lift models can reach up to 45ft in height.
Some of the largest scissor lift models, such as those used in construction and other industrial settings, can even reach heights of up to 70ft. Additionally, many scissor lift manufacturers offer “boom” or “telescopic” models, which can reach up to 80ft in height.
Despite the impressive heights that these scissor lifts can reach, it is important to note that the height caution label and guardrail is usually set at a lower height, usually around 12ft, which serves as an additional safety precaution.
How do you know how high a scissor lift goes?
The best way to determine how high a scissor lift goes is to consult the manufacturer’s manual or look up the model number on the manufacturer’s website. The specifications for the model should include the maximum height for the lift.
Additionally, some lifts may include a safety device, such as a key or lever, which can limit the lift’s height and should also be taken into account when evaluating the lift’s height. If a scissor lift is being used on a construction project, the manufacturer’s instructions should be consulted in order to ensure the lift’s clearance meets all necessary safety requirements, in addition to verifying the lift’s maximum height.
How do I make my Genie scissor lift go up?
To make your Genie scissor lift go up, you need to press the raise platform switch on the master control station. This switch will activate the motor to lift the platform. Make sure that the switch is pushed in and held in while the platform is being raised.
Before you press the switch, check to ensure that the emergency switch is in the off position and no body parts are in the scissor lift area. Additionally, make sure that the base of the lift is set on a level and stable surface, and the platform is at its lowest position.
When the platform reaches your desired height, release the switch and hold it in the off position. Lastly, use the emergency lowering lever to lower the platform down to its starting position, making sure that there is nothing in its path before doing so.
Can you use a scissor lift inside a house?
A scissor lift can be used inside a house, provided that certain conditions are met. The height of the house needs to be taken into consideration, as the lift will need to have adequate clearance and space to fit within the confines of the house.
The lift also needs to be certified and inspected to ensure it meets safety standards. Additionally, the flooring of the house needs to be able to support the weight of the lift and any load that is placed on it.
The house must be equipped with the appropriate power supply as well, as a scissor lift runs on electricity. Taking into consideration all of these factors, using a scissor lift inside a house is very doable, but it has been found that it works best in a workshop or garage rather than inside the home.
How do you use a genie lift?
A Genie Lift is a crane-like electrical lifting platform that is used to lift people and materials into elevated work areas such as onto the second floor of a building or to the top of a ladder. To use a Genie Lift, it must first be set up correctly and the operator must be properly trained and certified.
Before using the lift, make sure to read the owner’s manual and conduct a daily inspection of the platform, lifting frame, tires, wheels, handles and other components. Look for signs of damage, wear or damage from the elements.
The operator should also ensure that the lift is level and the controls are functioning properly.
When operating the Genie Lift, the operator must ensure that the weight of the load does not exceed the lift’s operating capacity. The operator should adjust the tilt, angle, height and reach of the platform so that it is safe and stable.
The operator must also wear the provided seatbelt, hardhat and appropriate safety apparel, and inspect the area around the lift to make sure people, obstacles and obstacles are removed.
Once the Genie Lift is properly set-up and the operator is trained, it is ready to use. The operator turns on the lift, adjusts the controls to the desired position, and then uses the manual controls to move the platform up, down, and in all directions.
The operator should also monitor the lift and the surrounding area while it is in use and be prepared to shut it down if it encounters any dangerous situations.
After using the Genie Lift, the operator should turn it off, inspect all of its components, and ensure that it has been properly stowed away. The operator should also report any malfunctions or safety issues to the appropriate personnel.
By following all of these steps, the operator can use the Genie Lift safely and efficiently.
