Skip to Content

How much does a Delta 8 in jointer weigh?

The weight of a Delta 8 jointer depends on the specific model you choose. Generally speaking, Delta 8 jointers weigh between 96 and 200 lbs, though some models may weigh a bit more or less. The Delta 10-inch Professional Jointer with Stand, for example, weighs 204 lbs, while the Delta 10-inch Benchtop Jointer weighs only 96 lbs.

The Delta 8-inch Classic Jointer with Stand weighs about 143 lbs. To get an accurate weight for the jointer you’re considering, you should check the manufacturer’s specifications for that particular model.

What is a good size for a jointer?

The size of jointer you need will depend on the type and size of lumber you plan to use with it. A standard 6” model is good for boards up to 6-7” wide, while an 8” model is great for boards up to 8-9” wide.

However, if you plan to work with larger slabs of lumber, such as those commonly found in post and beam construction, you may want a larger jointer such as a 10” or 12” model. For most applications, a 6” or 8” jointer is more than adequate.

Additionally, you may want to consider the length of the jointer’s tables. The longer the tables, the more accurate results you can achieve when jointing long boards. Consider the size of your shop, as the larger jointers can take up more room.

Finally, if you plan to joint curved or irregular wood pieces, you may want to look for a jointer with a smaller table and lower powered motor so you can more easily manipulate the board.

What does a jointer do?

A jointer is a power tool that is used to flatten, straighten, and square lumber. It can be used on various types of wood if used correctly. It typically consists of a flat table with a precisely sharpened blade, which is adjusted to the thickness of the material being cut.

The material is then fed across the jointer’s fence, which supports the board so that it maintains a consistent depth and thickness, and the blade trims off the edge at a straight angle. This allows the user to create pieces with one smooth and straight surface, perfect for making secure joints when used in woodworking applications.

A jointer also reduces the amount of sanding required, since the surfaces it creates are already fairly smooth.

Do I need a jointer if I have a table saw?

No, you do not need a jointer if you have a table saw. The main purpose of a jointer is to create flat, even surfaces on boards so that when you join them together, the surface is flush. A table saw does not have the capability to do this.

That said, you can still get boards fairly flush when joining them together if your table saw is set up correctly and you ensure that the cut is square. However, a jointer will give you a much more accurate result.

The other benefit of owning a jointer is that it can also help you to accurately re-square boards that may have warped or deteriorated. Ultimately the decision comes down to your budget and the size of your workshop.

If you have limited space and think that two machines are excessive, then a table saw may suffice. However, if you have the money and the space in your workshop, a jointer could be a great asset for helping you to get perfect results on your woodworking projects.

What is better to have a jointer or planer?

The answer to whether it is better to have a jointer or planer depends on the specific needs of a woodworker. If a woodworker needs to flatten large surfaces and make board edges straight, they may want to consider a planer.

Planers are ideal for taking rough timber and producing a smooth surface that is free of defects, making them suitable for hewn lumber and reclaimed wood. If a woodworker needs to joint the edges or faces of separate boards in order to create a sturdy table or other furniture, a jointer could be the better option.

Jointers specialize in making sure that the mating surfaces of boards are square, flat and free of warping or cupping. Jointers are also great for creating miter joints for making decorative frames and trim.

The ability to successfully join boards together is highly dependent upon having a flat and square mating surface, which the jointer is designed to provide. Ultimately, it’s important to determine what types of projects the woodworker plans to complete in order to determine whether a planer or jointer would be better suited.

Whats the difference between a jointer and a planer?

A jointer and a planer are two different tools used for woodworking and carpentry. The primary difference between these two tools is their purpose. A jointer is used for flattening and straightening stock before further processing or assembling into projects.

It is used to evenly reduce the thickness of a piece of wood, to square an edge, or to flatten the face of a piece of wood. A planer, on the other hand, is used for thicknessing boards and creating a uniform thickness throughout the length of a board or plank.

It is used to give boards a smooth finish, to shape and bevel edges, and also to shape shapes on boards. A planer cuts across the grain of the wood and removes material, while a jointer cuts with the grain and removes less material.

Both tools can be used to cut rabbets, tapers, and dados.

Do you use a jointer or planer first?

When it comes to whether to use a jointer or planer first, it largely depends on the type of wood that you’re working with and the desired outcome of the project. If you’re working with rough cut lumber that has lots of knots and warping, a jointer will be the perfect tool for the job.

The jointer will help you create a smooth and flat surface so that all sides are even, which will make it easier for the planer to get the job done. If you’re working with lumber that is already cut and planed, then a planer will be the best option as it will help you customize the thickness and straightness of the material.

Ultimately, it all boils down to the type of project you’re working on and the materials you’re dealing with.

What should you not do with a jointer?

A jointer should not be used to cut or shape wood into a desired shape. It is designed to create straight and flat surfaces, and should be avoided when trying to create curved shapes or intricate patterns.

Additionally, jointers should never be used to cut dadoes, rabbets, or any other bevel or molding, as these require a different type of specialized saw. It is also important not to overload the jointer, as this can cause wear and tear on the machine.

Finally, it is important to always read the instructions for the jointer and follow all safety precautions to ensure your safety.

Why use a jointer instead of a planer?

A jointer is an incredibly valuable woodworking tool that serves a very specific purpose. Unlike a planer, a jointer is designed to straighten and flatten the edges of boards, as well as create parallel edges on boards with curved edges or edges with uneven surfaces.

By using a jointer, you can ensure that your boards are perfectly aligned; this is especially important when creating boards that need to fit flush with each other in projects such as creating cabinetry or other projects.

With a planer, you can only flatten the faces of the boards and not the sides.

Another reason to use a jointer instead of a planer is to create the best possible surface texture when milling boards. While a planer will still provide a smooth surface, it can’t create a surface as flat as a jointer.

During a planing operation, the blades grind down the surface fibers and create microscopic valleys. The depth of these valleys can cause additional problems, such as warping or even splitting of the board.

By using a jointer to create your boards, you can ensure that your boards have a smoother, flatter surface by removing burrs and milling the boards in one pass.

A jointer is also more accurate than a planer in many respects. For example, it’s much easier to use a jointer to create joints, rabbets, and slots. While a planer can technically accomplish all of these tasks, it can be far more difficult to accurately control the depth and angle of the cut.

By taking the time to use a jointer, you can ensure that your cuts are clean, accurate, and precise.

Overall, while both a jointer and a planer can be immensely useful in any woodworking shop, a jointer is generally considered to be a better choice for projects that require surfaces to be perfectly flat, straight, and even.

This is because jointers can more accurately control the depth, angle, and surface quality of the cuts.

Do I really need a jointer?

Whether or not you need a jointer depends on the type of projects you are doing. Jointers are used for flattening boards and creating straight edges for joins, so if you plan on doing any of these type of projects, then a jointer may be helpful.

For example, if you want to join two pieces of wood together, then a jointer can be used to make sure you have two straight edges. Similarly, if you are working with curved surfaces, then a jointer can be used to flatten the boards and make them easier to work with.

Additionally, a jointer can be used to create bevels and decorative edges, which can be used to add character to your projects. On the other hand, if you primarily work with thin pieces of wood that do not require a lot of flattening and straightening, then you may not need a jointer.

Ultimately, it is up to you to decide whether or not you need a jointer for your projects.

How can I straight my edges without a jointer?

The first and simplest way is to use a hand plane. You can plane one edge at a time to get a flat edge and then plane the adjoining edge until you have a straight, even joint.

Another option is to use a sharp hand saw combined with a simple saw guide. You can draw a straight line on the wood to reference and then use the saw guide to keep the saw blade aligned with the line as you saw through the wood.

This should produce a straight, even edge.

You can also employ a hand-held router to get a straight edge. First, place the edge of the wood to a scrap piece of wood to use as a reference edge. Adjust the router bit so that it cuts to the depth of the edge, and then rout the edge along the scrap piece with steady, even pressure.

Finally, you can use a belt sander to sand down the edge until it is straight. Start by attaching a coarse sandpaper to the sander and then carefully sand the edge until it is even.

In summary, there are several methods for straightening the edges of wood without a jointer, including hand planing, sawing with a saw guide, routing, and sanding with a belt sander.

Can a router table be used as a jointer?

Yes, it is possible to use a router table as a jointer. However, it does come with some caveats. A router table is typically used to make precision cuts in wood, such as edge-cutting and mortising. Because of the cutting accuracy required for these operations, router tables typically don’t have the same precision flatness of a dedicated jointer.

This means that while you can use a router table as a jointer, it is not ideal and you will likely not achieve the same results as a dedicated jointer machine. Additionally, router tables are often set up with a different blade height and cutting plane than a dedicated jointer, so you may need to make some adjustments to make sure it is properly set up.

Ultimately, while you can use a router table as a jointer, it is not recommended due to the decreased cut accuracy and the additional work that may be needed to make the adjustments.

Can you plane a 2×4 on edge?

Yes, it is possible to plane a 2×4 on edge. Ripping a 2×4 to thin strips on a table saw is a common carpentry technique that can be used to plane down the edges of a 2×4 for use in many applications.

To complete this project, you will need a table saw, sharp blade, push blocks, protective eye and hearing protection, work gloves, and strapping material. Begin by measuring and marking the desired strip size on the 2×4.

Next, adjust the fence of the table saw so the saw blade is positioned directly next to the marks. Secure the 2×4 into the table saw with the push blocks, ensuring they are directly against the blade.

Use a slow, steady action to drive the 2×4 through the saw, avoiding excessive force. Remember not to fully engage the motor until the 2×4 is firmly mounted into the table saw. After this process, you should have strips of 2×4 that have been planed to the desired lengths.

Be sure to properly dispose of scrap material and properly clean the area afterward.

Who makes ridgid jointer?

Ridgid Jointer is manufactured by the company Rigid, a company that makes and designs professional grade power tools, accessories, and hand tools. Located in Anderson, South Carolina, the company was founded in 1924, and has since developed a wide range of power tools and accessories for both home and professional workshops.

The Ridgid line of jointers includes models made from aluminum, galvanized steel, and enclosed gearing, among other features. These jointers offer precision depth adjustment, dual-reversible blades, and adjustable fence angles, with some models also offering a storage shelf for blades and other accessories.

The Rigid tools are designed with safety and durability in mind and come with a three-year warranty on their power tools, guaranteeing you the performance you need and expect out of your jointer.

How wide of a jointer do I need?

The width of jointer you need depends on the size of boards you plan to joint. Generally speaking, if you plan to work with boards up to 6 inches wide, then a 6-inch jointer is probably sufficient for your needs.

If you plan to work with boards wider than 6 inches, then a 8, 10, or 12-inch jointer is recommended. However, keep in mind that a wider jointer makes it easier to joint wider boards, but it also takes up more shop space, costs more, and is heavier and more difficult to move around.

In addition, if you’re just starting out, you may want to go with a smaller jointer as it will usually be more affordable and will be easier to use and understand. As you become more experienced with using a jointer, you can then upgrade to a wider model if needed.

Does ridgid make a 8 inch jointer?

Yes, Ridgid does make an 8-inch jointer. The model number of this jointer is R4515. This powerful jointer is perfect for straightening and smoothing rough and warped lumber. It features a powerful 2 HP motor, a cast-iron fence with a large scale, and a built-in dust port for easy cleanup.

The large 8-inch wide surface allows for bigger pieces to be joined and the 3-knife cutter head ensures a smooth finish. Furthermore, the ridgid jointer includes a variable speed range of 6,000-11,000 RPM so you can truly customize the perfect cut.

It also has an easy to adjust fence and a non-slip rubberized tabletop to keep your workpieces safe. In summary, the Ridgid R4515 8-inch Jointer is a great tool for any woodworking enthusiast.

Can you plane a board with a jointer?

Yes, you can plane a board with a jointer. To use a jointer to plane a board, make sure the jointer’s knives are sharp and set them evenly across the width of the board. Make sure the knives are level with the outfeed table.

Run your board through the jointer to make sure it’ll be flat when you’re done. Start with the leading edge of the board and slowly feed it into the jointer until it passes through the knives. Turn the board around, and run it through again, then flip and repeat until you’ve reached the desired thickness of the board.

Finally, make sure to clean the jointer after using it.

What’s the definition of a jointer?

A jointer, sometimes referred to as a “long bed jointer,” is a woodworking tool used to ensure that two pieces of wood are joined together flawlessly, creating a flat surface with two perfectly straight edges.

It consists of a flat, long bed and a cutting blade, sometimes called a cutterhead, which operates in a perpendicular direction. The jointer’s primary purpose is to provide a perfectly flat, straight joint between two pieces of board, allowing them to be separated and re-joined if necessary.

When a joint is being made, the front of the board is run through the jointer, leaving a perfectly flat edge that can then be matched to another piece of board. Depending on the type of jointer, additional operations such as rabbeting, rebating, and beveling can also be performed.

Leave a comment

Your email address will not be published. Required fields are marked *