The standard width of wood planers usually varies from 6 inches to 50 inches. The size of the planer you need for your project will depend on the type of material you’re using and the size of the wood you’re working with.
For example, a 6-inch or 8-inch planer is best suited for small, thin materials like veneers, while a 15-inch or larger planer can handle thicker, heavier material such as large lumber. In general, the larger the planer, the more it will cost.
There are also some specialty planers like jointers and thicknessers that are designed to do specific tasks.
Is the Craftsman planer any good?
Yes, the Craftsman planer is a good option if you’re looking for a reliable tool to help with your woodworking projects. This planer features a robust steel construction, which provides the strength and durability you need for even the most demanding projects.
The planer also comes with a convenient depth adjustment knob, so you can easily make precise cuts for your woodworking needs. Additionally, with its adjustable blades, you can obtain smooth and even results every time.
The planer also comes with an ergonomic handle, so it’s comfortable to hold and operate. All in all, the Craftsman planer is an ideal choice for hobbyists and experienced woodworkers alike who are looking for a reliable and durable planer to get their projects done quickly and accurately.
What is the widest benchtop planer?
The widest benchtop planer you can find is likely going to be the Dewalt DW735X. This planer has a full 13 inch wide capacity and will allow you to tackle larger boards quickly and conveniently. It is powered by a 15 amp motor with a no-load speed of 10,000 RPM, allowing you to achieve professional results every time.
The other specs include 7.5-inch fan-assisted chip ejection, a three knife cutterhead that produces 30 percent more knife life and can make 96 cuts per inch, and an infeed/outfeed table that is 30 inches long.
The Dewalt DW735X is certainly the widest benchtop planer for your money and will give you years of trouble free performance.
How wide do I need for planer thicknesser?
The width of a planer thicknesser will depend on what you intend to use it for. Generally, a planer thicknesser should be wide enough to accommodate the stock you are intending to work with. If you are working with very narrow pieces of stock, then a planer thicknesser with a width capacity of 6” or less should be sufficient.
However, if you are planning to work with widths up to 12”, then a planer thicknesser with a width capacity of 12” or more should be chosen. Additionally, when purchasing a planer thicknesser, it is important to be mindful of the total planing width, which is the length of the cut that it can make at one time.
This indicates the total width of the planer at one time, and should also be taken into consideration when determining the desired width for your planer thicknesser.
What is the difference between the Dewalt DW735 and DW735X?
The Dewalt DW735 and DW735X are both two speed thickness planers, but the DW735X has a few additional features that provide a higher level of performance. First, the DW735X has a three knife cutterhead, which allows for faster cutting and improved results on difficult grain.
Second, it also comes with an extra set of knives, giving you more options when you are dealing with different types of wood and surface finishes. Finally, the DW735X also comes with a granular cutter head and a dust hood to help keep the work surface clean.
Overall, the DW735X is more expensive than the DW735, but it provides a more reliable and powerful performance.
Is a thickness planer worth it?
A thickness planer is a tool that can be very useful for a variety of projects. It is used to plane or flatten boards, which is especially useful for creating uniform thicknesses. The tool works by taking a board and passing it through the spinning blades of the planer which shave off any excess material.
If you need boards of an exact thickness, then a thickness planer is the best tool to get the job done.
The planer can also help to make boards with a smoother finish. This can be useful for making furniture and cabinetry, as the smoother finish would look more aesthetic. It can also help reduce some of the sanding work needed.
The price of a thickness planer can vary, as it is dependent on the motor, size and brand. Generally, the more power a motor has, the more expensive the tool is. In terms of costs, renting one might be a more financial decision for short term projects, however, for long term projects, it could be worth investing in your own planer.
In conclusion, a thickness planer can be worth it if you have a need for boards of exact thickness and smoother finishes. Depending on your budget and project needs, either renting or purchasing one can be the right decision.
Which is better planer or jointer?
It really depends on the specific project and what type of material you are working with. Generally, a planer is used to flatten and smooth wood by making multiple passes, shaving off a thin layer of wood with each pass.
A jointer is used for jointing two pieces of wood along the edges, giving them a flush surface. The jointer will cut off a portion of the edge, creating a clean and consistent joint.
If you need to smooth and flatten the face of a piece of wood then a planer is the ideal tool for the job. If you need to create a flat and flush joint between two pieces of wood then a jointer is the better choice.
Both tools are essential for working with wood, but to effectively complete your project you should choose the one that best suits your needs.
What are the wood planers for the money?
Wood planers can be used for a variety of woodworking projects, from flattening and refining wood surfaces to adding decorative touches. When it comes to wood planers for the money, it’s important to consider your specific needs and budget.
Generally speaking, wood planers come in a range of sizes, types, and price points.
If you’re looking for a basic, budget planer that can handle basic carpentry projects, a smaller size benchtop planer or thickness planer will likely do the trick. These planers tend to cost anywhere from around $200 – $700, depending on size and features.
If you’re looking for a more versatile planer that can handle tougher tasks, a larger, stationary planer is a better option. These planers range in price from around $500 – $2000, depending on size and features.
Generally, stationary planers also offer increased horsepower and cutterhead speeds for a smoother finish.
Finally, for more specialized projects, it’s also worth looking into a joiner-planer combination machine. These machines perform the functions of both a jointer and a planer, so you don’t have to purchase and maintain two separate tools.
The cost for these machines, though, can range from around $1300 – $3000, depending on size and features.
Overall, when it comes to wood planers for the money, there’s a wide variety of options available to match your project and budget.
How does a jointer work?
A jointer works by taking the material you want to join, such as two pieces of wood, and running them simultaneously through the jointer’s two cutting edges and two rollers. The rollers press the wood together while the blades cut along their edges to form a uniform edge.
Most jointers also have a fence which allows the user to adjust the width of the joint.
The rollers are necessary to force the wood together while keeping it level and steady while being cut by the blades. This ensures that the two pieces are bound together tightly and evenly. The fence helps you adjust the width of the joint to get the exact size that you need.
Depending on the model, jointers can also be used for making rabbets (shallow grooves) or for general shaping and smoothing of a surface by cutting off raised grain or otherwise smoothing out an uneven surface.
Once the joint has been properly cut, it is then ready to be put together and secured with either dowels or screws. Jointers make the job of joining two pieces of wood together much easier and more precise than if it was done by hand.
Why use a jointer instead of a planer?
Using a jointer instead of a planer is beneficial for many reasons. Firstly, a jointer will help to create a perfectly flat and straight surface on a board. This is accomplished by running the board over two blade or cutter heads on a jointer that are set perpendicular to the table’s length.
Planers, while they can produce a flat surface, are not as efficient at making a board perfectly flat, and due to the shape of most board edges, planers are not able to joint those edges at one time.
Jointer machines also offer a variety of other advantages. For example, most jointers are built with an adjustable fence, allowing you to easily adjust the angle and length of the cut. This is useful for creating rabbeted edges and other specialized cuts, while planers lack this capability.
Additionally, jointers can create a smoother surface on the wood because their cutting head is designed to create uniform notches in the wood, which helps to eliminate gouges and uneven surfaces.
Overall, using a jointer instead of a planer is the preferred method for creating straight, flat, smooth surfaces on wood. Jointers offer advantages that planers do not, including a variety of adjustable cutting angles and the ability to provide precise, uniform notches in the wood for a smooth finish.
Do you need both a planer and a jointer?
The answer would depend on your specific woodworking needs. A jointer is used primarily to flatten the edges of a board and to produce a defined straight edge on a piece of lumber, while a planer is used to smooth and flatten the face of a board, as well as to make it a uniform thickness.
If you only need to do a few projects, you might only need one or the other. However, if you plan on tackling more complex projects, having both a jointer and a planer will give you more flexibility when it comes to preparing your work pieces.
A jointer allows you to make sure that edges of your boards are at a perfect 90-degree angle, while a planer will ensure that pieces are of a uniform thickness, instead of having pieces tapering unevenly.
With both a jointer and a planer, you’ll be able to quickly prepare lumber for all kinds of projects, which will save you both time and effort.
Whats the difference between a planer and a joiner?
Planers and joiners are both tools used by woodworkers to shape and finish wood pieces. However, they each have a distinct purpose and use.
A planer is a power tool used to create even and consistent thickness in a board. It works by passing a board over spinning blades that remove material, thus planing the board down to the desired thickness.
Planers are often used for thicknessing boards, as well as for jointing and smoothing out rough surfaces.
A joiner, on the other hand, is typically used to connect two pieces of wood together. A joiner uses a wooden cutting blade to make grooves, or dados, and tongues in wood. The pieces of wood are then joined together and secured through the use of glue or other fasteners.
Joiners are best used for creating strong joints, especially for making cabinets, boxes, furniture and other projects that require tight-fitting parts.
In short, planers are used to create even and consistent board thicknesses, while joiners are used to join two pieces of wood together in a strong and secure way.
Can you use a table saw as a jointer?
Yes, it is possible to use a table saw as a jointer in certain circumstances. Jointer and table saws are both versatile tools that can be used for a variety of woodworking projects. That said, using a table saw as a jointer is generally not recommended because of several factors.
Table saws do not provide the same level of accuracy or features that jointer machines typically have, such as adjustable depth gauges, adjustable fences, and having two blades that can be accurately aligned.
This makes it difficult to achieve precision cuts with a table saw. Additionally, the narrow throat of a table saw can also make it difficult to joint larger boards as they need to fit in the throat.
If you are considering using a table saw as a jointer, it is important to take the necessary safety precautions, such as using proper technique and properly securing your workpiece. Additionally, it is important to periodically check your saw blade and table to make sure they are both in good working condition.
To summarize, while it is possible to use a table saw as a jointer, it is generally not recommended in most cases. It is important to consider the features and accuracy of a jointer machine compared to a table saw.
If you do decide to use a table saw for jointing, make sure to take safety precautions and regularly check your machine for any problems.
Should I reclaim wood plane?
Yes, you should definitely reclaim wood plane When done properly, reclaiming a wood plane can be a rewarding experience, as it has many benefits. Reclaiming a plane can help restore its original look and feel, as well as increase its longevity.
Reclaiming also allows you to customize your plane to better suit your needs, as you can sharpen it as desired and make any other modifications you see as necessary. In addition to being more aesthetically pleasing and better functioning, a reclaimed plane is also greener, as it helps divert resources from the landfill and can save you money in the long run.
Does a planer make wood smooth?
Yes, a planer is a great tool to use to make wood smooth. It works by running the wood through rollers with blades that shave off thin layers of the wood, reducing its thickness and leaving a smooth surface.
Depending on the type of wood you are planing, you may need to adjust the settings on your planer to make sure it’s just right for the job. If you plan on using the planer to create very smooth surfaces, it is recommended to work your way from rough-cut to finer sanding and finish with a medium or fine grade of sandpaper.
Additionally, there are many types of planers available for sale, with some offering specialty functions such as shaping, beveling, and grooving, which can be used to make the wood’s surface even smoother.
When would you use a planer?
A planer is a power tool used to smooth and cut wood to uniform thickness. It can be used to reduce a piece of wood to a certain thickness and make it of uniform thickness throughout by shaving off the surface of the wood.
A planer can also be used to make rabbeted edges, dadoes, and other joinery-related cuts. It is typically used in conjunction with a jointer, which is used to get a straight edge.
A planer is most commonly used to flatten a board, often when making large furniture pieces or built-ins. It is also used to create a smooth, even surface when making cabinet doors or worktops. It can also be used to create tongue and groove joints, or when making flooring, counters, or countertops.
Furthermore, a planer can be used to make beveled edges on wood or even to shape or trim wood pieces with precision.
