The charger you should use for your Apple TV remote is the Lightning to USB Cable that came with your Apple TV device. This cable is white in color and has a USB connection on one end and a Lightning connection on the other.
You can use this cable to charge your remote from any USB port, such as the USB port on your Apple TV, a USB power adapter, a computer, or other device. Simply plug one end of the cable into the Lightning port on your remote, and then plug the other end of the cable into the USB port.
Your remote should begin to charge. Make sure that you unplug the cable when the charging is complete.
Can you wirelessly charge Apple TV remote?
No, you cannot wirelessly charge Apple TV remote. Apple TV remote runs on a replaceable battery and does not have wireless charging capabilities. You must remove the back of the remote to access the battery and replace it when it is no longer functioning.
If you need to charge the remote, you must use a USB-C cable connected to power, a USB wall adapter, or a computer.
How can you tell if Apple TV remote is charging?
You can tell if your Apple TV remote is charging if the LED lighting on the front of the remote turns from an amber color to a green color. There will also be an animation of three green LEDs blinking on the front of the remote.
Additionally, if your Apple TV remote is connected to the Apple TV, the menu bar on the Apple TV home screen will show a lightning bolt icon when your remote is charging. If your remote is not charging, a battery percentage will be displayed on the home screen menu bar of your Apple TV.
Does a light come on when Apple TV Remote is charging?
Yes, when the Apple TV Remote is charging, a light will come on. The charging light is located at the bottom of the remote and will turn on when it is plugged into a power source. Depending on the model of your Apple TV, the light might be either white or orange.
When the battery is finished charging the light will turn off. It is important to note that the remote will not work while it is charging, so if you do not see the charging light and try to use your remote, it is likely that the battery is just drained and needs to be replaced.
How long does Apple TV Remote battery last?
The battery life of an Apple TV Remote will vary depending on usage, but most owners report that they are able to get several months of heavy usage out of a single battery. Apple states that their Remote battery should last up to 3 months in regular use.
To optimize battery life, you should make sure that Bluetooth on your Apple TV and other devices is turned off when not in use. Additionally, the battery should be regularly recharged when the battery level drops below 50%, as this will help to maintain longevity.
How do you reset an Apple Remote?
Resetting an Apple Remote can be done quickly and easily. There are two ways to reset the remote, either with the reset button on the underside of the remote or with the built-in Apple Remote app.
To reset the remote with the reset button:
1. Turn the remote over, so that the bottom is facing upward and locate the reset button.
2. Press and hold the reset button for a few seconds.
3. When you release the reset button, the LED light at the top of the remote will start flashing red, signifying that the reset is complete.
To reset the remote with the Apple Remote app:
1. Open the Apple Remote app on your mobile device.
2. Tap the settings icon.
3. Scroll down and select “Reset Remote”.
4. Follow the steps on the screen to complete the process.
Once the reset is complete, the Apple Remote will be able to pair with your device.
Does the Apple TV Remote have a battery?
Yes, the Apple TV Remote does have a battery. The specific model of the remote determines which type of battery it uses. The fourth-generation Apple TV and Apple TV 4K use a built-in rechargeable Li-ion battery, while earlier models use an AAA alkaline battery.
If you purchased the Apple TV Remote separately, it may come with one or two AAA batteries. You should replace the battery in either model once it starts to wear down.
What do you do when your Apple TV Remote stops working?
If your Apple TV remote stops working, there are a few potential solutions to try depending on what type of remote you are using.
If you are using the Apple TV Remote app, simply close the app and restart it. Make sure your iOS device is running the latest version of the app and that both devices are connected to the same Wi-Fi network.
You may need to uninstall the app and then reinstall it.
If you are using an IR remote, check the batteries in the remote and make sure they are not drained. Check to make sure the distance between the remote and the Apple TV is no more than 16 feet.
If your remote is older, and might be nearing the end of its lifespan, Apple recommends replacing the remote with a new one and seeing if that resolves the issue. Additionally, if you have recently updated your Apple TV, the remote might need to be ‘reset’.
To do this, just hold down the ‘Menu’ and ‘Volume Up’ buttons on the remote together for six seconds.
Finally, if your remote still doesn’t respond, look for any obstructions between the remote and the Apple TV. Dust and other small objects can block the signal, preventing any commands from being sent.
Overall, if your Apple TV remote stops working, there are several potential solutions depending on which type of remote you are using. From restarting the app, to checking the batteries in the remote, to replacing the remote, hopefully one of the solutions will be the fix.
How long does it take to charge Apple TV remote?
Typically, it will take approximately 2 hours to charge an Apple TV remote. However, this can vary depending on the strength of the power source that the remote is being charged off of. In addition, some Apple TV remotes may require more charging time than others.
It is not recommended to charge the remote for any longer than 4 hours. It is also important to avoid using a power source that has a voltage greater than 5 volts, as this can cause damage to the remote.
