Skip to Content

What company owns Bostitch?

Bostitch is a brand owned by the company Stanley Black & Decker. Stanley Black & Decker is an American manufacturer of tools and household hardware. The company is based in New Britain, Connecticut, and was formed in 2010 by the merger of The Stanley Works and Black & Decker.

Stanley Black & Decker is organized into four operating segments: Stanley Engineered Fastening, Stanley Security Solutions, Stanley Tools & Storage and Stanley Industrial & Automotive. Bostitch is part of the Stanley Tools & Storage segment, which has been a major player in the tool market since 1843.

Bostitch produces air tools, power tools and hand tools. Its products are designed for a range of industrial, construction and DIY applications, and they are sold in more than 140 countries.

Is Bostitch American made?

Yes, Bostitch is an American-made product. The company, Bostitch Corporation, was founded in 1896 in Massachusetts. Today, Bostitch is part of the Stanley Black & Decker family of companies and continues to manufacture many of its products in the United States.

Bostitch designs and manufactures staples and staplers, manual and pneumatic air tools, coil and strip nails and accessories to meet building, home repair and construction demands. The company also produces office products, including pencil sharpeners, hole punches and fasteners.

Its products are sold in over one hundred countries around the world, but the majority are made in the United States.

Where is Bostitch sold?

Bostitch is a leading provider of tools and fasteners, allowing professional contractors and serious DIYers to get the job done right. Bostitch products are sold at many retail and online stores, including Home Depot, Walmart, Lowe’s, Menards, Shop Farm and Fleet, True Value, Sears, and Amazon.

Certain specialty products are only available at select retail outlets. You can also purchase Bostitch products directly through their website at bostitch. com.

How do you use the Stanley Bostitch stapler?

Using the Stanley Bostitch stapler is simple. First, make sure the top of the stapler is locked in the open position and that you have the required staple size in the tray. After that, place the paper stack(s) to be stapled in the opening in the stapler, making sure that the pages are securely between the anvil and stapler head.

Squeeze the stapler’s handle firmly but without too much aggression to trigger the stapling action. Depending on the model you possess, the stapling head will make a notable “thud” when the staple is fired.

If you have manual stapler you will need to release the handle and press back down in order to advance the staple magazine. Repeat these steps until the stack is stapled to your satisfaction. For multiple stacks, the stapler head must be locked in the open position if it is not already.

This will allow for easier access of the anvil for each stack. When you are finished stapling, place the head back in the closed position for storage.

How do you fix a jammed stapler that won’t open?

If you have a jammed stapler that won’t open, the first step is to remove all the staples that are visible. Then, use a thin object like a paper clip to carefully go through the inside of the stapler and remove any remaining staples.

You may also want to twist open the stapler and take it apart, then put it back together to ensure no staples remain. Once all the staples are removed, check to make sure that the spring and other parts are working properly.

If they are not, you may need to replace them. Additionally, you may need to add a small amount of oil to the stapler parts to make sure they move properly. Follow the instructions provided with the stapler for proper lubrication.

Finally, load the staples correctly, making sure the flat top of the staple sits underneath the black plate of the stapler. It’s also important to load the exact same kind of staple your stapler was designed to use.

If you followed all these steps and the stapler still doesn’t work properly, it may just be worn out and need to be replaced.

Why does my stapler keep jamming?

There can be a number of reasons why your stapler is jamming. The most common cause of a jammed stapler is poor-quality staples. Low-quality staples may not feed into the stapler properly, or may jam as they are being fed into the stapler head.

If you are using low-quality staples, try replacing them with high-quality staples that are specifically designed for your stapler.

If you are already using high-quality staples, it’s possible that the stapler head may be misaligned or out of shape. If this is the case, it can be difficult for the staples to feed properly into the head, which can result in a jam.

Check the stapler head to ensure that it is correctly aligned and in good condition; if it’s not, you may need to purchase a replacement head for your stapler.

It’s also possible that the inner mechanism of your stapler is malfunctioning. If this is the case, it’s best to have your stapler serviced by a professional to ensure that it’s in proper working order.

Finally, incorrect usage of the stapler can also lead to jams. Staples should be placed flat on the paper when stapling; if not, the staples may become misaligned, which can lead to a jam. Additionally, make sure to apply a steady pressure when stapling, but don’t over-squeeze the stapler head, as this can cause a jam as well.

Why is my staple gun not firing?

The most common reason could be that the gun has run out of staples and needs to be reloaded. You should first check to make sure the gun is fully loaded before proceeding. Also, the gun could be blocked or jammed with a staple that has been misfired.

This can be caused by incorrect loading of staples, as well as not allowing enough room for the previous staple to properly latch in. If this is the case, you should remove the jammed staple with pliers and double check that the magazine is loaded correctly.

Finally, make sure there is sufficient force applied to the handle of the gun during squeezing. If not, the staple might be failing to push the latch bar that fires the staples into the material.

Does Bostitch have warranty?

Yes, Bostitch does have a warranty. All Bostitch products come with a minimum of one-year warranty for defects in material and/or workmanship. Some products may have a longer warranty, depending on the type of product.

To find out the exact warranty for a specific Bostitch product, you can look up the item’s information on the Bostitch website. Additionally, some retailers may offer extended warranties on Bostitch products, which you can discuss with the retailer from which you purchased the Bostitch product.

To learn more about Bostitch warranties or for assistance with any warranty-related questions and issues, you may also contact Bostitch customer service directly.

Is Bostitch and DeWalt the same company?

No, Bostitch and DeWalt are not the same company. Bostitch is owned by Stanley Black & Decker, which is a major global tools and storage company that includes a variety of brands. DeWalt is owned by the Techtronic Industries, which is based out of Hong Kong and produces power tools, outdoor power equipment, and accessories for the professional and do-it-yourself markets.

Both companies produce a range of power tools, from drills and saws to nailers and staplers, but Bostitch has become known for its staple guns, air compressors and exhaust hangers. DeWalt, on the other hand, is widely known for its high-end drills and cordless tools.

When did Stanley Buy Bostitch?

Stanley Black & Decker, Inc. acquired Bostitch, a company that manufactures manual and pneumatic staplers, from metal furniture and storage solutions company Steelcase, Inc. in March of 2004. Stanley Black & Decker, Inc.

is an American multinational manufacturer of household hardware and hand tools, with products ranging from caulking guns to circular saws. Before being acquired by Stanley Black & Decker, Bostitch was founded as The Boston Wire Stitcher Company in 1896 by Thomas Briggs and George W. Production.


Who bought Bostitch?

In April of 2020, Stanley Black & Decker announced it had completed its purchase of Bostitch, a global leader in manual and pneumatic stapling, nailing, and fastening solutions. Stanley Black & Decker is a leading global provider of tools and storage, commercial electronic security and engineered fastening systems, with an extensive portfolio of iconic brands and products including Stanley, Black & Decker, Craftsman, Kobalt, and DEWALT.

Bostitch products are renowned domestically and internationally as top choices in office and home improvement applications. The acquisition is well positioned to provide Stanley Black & Decker with greater presence and capabilities in the categories it serves, thus enhancing its position as a premier supplier of professional tools.

The purchase of the company furthers Stanley Black & Decker’s commitment to offering the very best in quality and innovation.

What kind of staples does Bostitch use?

Bostitch is a brand of Stanley Black & Decker, and since 1996, Bostitch has been using Stanley Bostitch High Carbon Steel staples for all of its staplers. These staples are designed for consistent section control – to create clean and uniform results with each use.

These staples are available in a variety of sizes and leg lengths, including 1/4″, 3/8″, 1/2″, 5/8″ and 3/4″. Bostitch staples have been designed and tested to be especially resistant to jamming, and come in a box designed to protect the staples from dust, moisture, and bending.

Additionally, Stanley Bostitch staples feature Selector, a patented cartridge that allows users to easily switch between two sizes of staples, so they can be used in a variety of tasks, including binding, fastening, packaging and other applications.

Who makes Dewalt?

Dewalt is a brand of power tools that are made by the American-based company, Stanley Black & Decker. The company was founded in 1924 and it has since become the largest power tool manufacturer in the world after merging with the Swedish company Electrolux Home Products in 2010.

Dewalt produces a wide variety of tools, from automotive tools to woodworking tools, and its products can be easily found in retail and home improvement stores. The brand is known for its strong designs, reliable performance, and durability, and all of its products come with a three year warranty.

How much does a Bostitch nail gun cost?

A Bostitch nail gun can range in price depending on the type of gun and how common it is. Some lower end Bostitch nail guns can start around $70, while higher end guns can go up to around $200+. Professional grade Bostitch nail guns can go well over $200, depending on what you’re looking for and what features you’re expecting.

If you just need a simple gun that will do the job, a lower end Bostitch nail gun will probably be enough. However, if you need something that will last longer and that has a variety of features and capabilities, then you might want to consider a higher end Bostitch nail gun.