Skip to Content

What do you do when your iPhone is completely dead and wont charge?

When your iPhone is completely dead and won’t charge, the first step is to determine the cause. If your phone was recently exposed to water or was dropped, there may be a hardware issue that is preventing it from charging.

In that case, you should take it to an Apple store or authorized service center to have it inspected and fixed.

If the issue is not related to water damage or a drop, it could be that your charging port has become blocked by lint or dust. If that is the case, use a can of compressed air and an old toothbrush to carefully clean the lightning port, then try charging again.

If the issue persists, you may need to consider resetting your phone. This can be done by pressing and holding the power and home buttons simultaneously until the Apple logo appears. Once the reset is complete and your phone turns on again, try plugging it in and charging it.

If all else fails, your battery may be draining faster than it can charge. In this scenario, replacing the battery with a new and compatible one is the only fix.

How do I force my iPhone to turn on with a dead battery?

Unfortunately, it is not possible to force an iPhone to turn on with a dead battery. The battery must be charged in order for the phone to turn on. If the phone has completely died and will not respond to plugging in the charging cable, then you will need to purchase a new battery to replace the existing one.

To replace the battery, you will need to purchase a new battery and follow the instructions included with your phone or get it replaced by a trained electrician. Once the new battery is installed, the phone should turn on as normal.

How do I turn on my iPhone if it wont turn on or charge?

If your iPhone won’t turn on or charge, there are a few things you can try to get it back up and running. First, make sure your iPhone is plugged into a wall outlet, and that the charging cable is securely connected to your device.

You may also try connecting your device to a computer with a USB cable to see if that will kickstart the charging process.

Another way to attempt to turn your iPhone on is to force restart it. To do this, press and hold the Power and the Home buttons together for at least 10 seconds, until you see the Apple logo. This should force your device to restart and turn on.

If your device still will not power on, it may be a sign that your battery needs to be replaced. If this is the case, you will likely need to take it to an Apple store, or an authorized repair center, to have it serviced.

Replacing the battery should resolve the issue, and get your iPhone back up and running.

Why won’t my iPhone turn on after being dead?

If your iPhone has been dead and won’t turn on, there are several potential causes that may be to blame. It is possible that the battery has drained, the phone has become overheated, or a software issue is present.

First, check the battery level to ensure it has not been completely drained. You can do this with some Android phones by pressing and holding the power button or by connecting it to a charger. Next, try letting the phone cool off.

If it was exposed to hot weather or was in direct sunlight, it’s possible that overheating has caused the phone to shut down.

If the phone is still not powering on, it may be due to a software issue. Try restarting the phone by holding down the power button for 10 to 20 seconds. If nothing happens, it may be time to address any potential software issues such as a corrupted operating system by performing a factory reset.

Should these steps fail, the iPhone may need to be brought in for professional repair. Hardware damage or an irreparable system error could be the cause and in these cases, a technician might need to open up the phone in order to repair it.

How long does a completely dead iPhone take to turn on?

If your iPhone is completely dead and won’t turn on, it could take several minutes to start up. This could range from a few minutes to over an hour depending on your phone’s age and condition. If your phone has a fully drained battery, it can take several hours to power back up and become usable.

In some cases, the battery may have completely drained, resulting in a reset and a complete system restore, meaning the phone won’t turn on until all the software has been reinstalled. If your iPhone is completely dead, you can try plugging it into a wall outlet or computer for a few minutes to see if it powers up.

If that doesn’t work, you should try resetting the phone, press and hold down the power and home buttons simultaneously for 10 seconds and then release with your finger still hovering over the home button.

If the Apple logo appears, the reset was successful.

What do you do when your phone is charging but wont turn on?

If your phone is not turning on while it is charging, the first thing to do is to check that the charging cord is securely connected. Make sure both ends are in properly and firmly connected. If one end is loose, try to ‘wiggle’ the cord in order to make sure that the connection is secure.

If this doesn’t work, try switching to a different charging cord. The cord you are using could be damaged or not be compatible with your device.

If a different cord doesn’t fix the issue, it could be a problem with the adapter, USB port, or outlet. If the USB port on your device is loose or damaged, it may not be providing power to your phone.

Try plugging your device and charger into a different outlet or USB port to determine if this is the case. Additionally, try using a different adapter to see if the problem is being caused by your device’s adapter.

If these solutions do not work, you may need to contact your phone provider or bring it to a service center. The issue could be related to your phone’s software, battery, or display. Professionals may be able to diagnose and fix the issue.

What if phone is not getting charged?

If your phone isn’t getting charged, there are a few things you can try to fix the issue. First, make sure your phone is turned off before inserting the charger. Second, make sure you are using the correct type of charger and charging cable for your phone.

Third, check the charging port on your phone for any lint or other debris that can be preventing the connection between the charger and your phone. Secondly, use a different wall outlet to plug the charger in and if your device is still not charging, you may have to try a different charger.

If that doesn’t solve the problem, it is likely that your device is having a hardware or battery problem and you should consider taking it in to a professional to get it checked out.

How can I get my dead phone to work again?

It is possible to get your dead phone to work again, however, the solution depends on what caused the issue and the type of phone you have. If the issue is related to a software issue, resetting the phone could help.

If your phone is completely dead, you may need to replace the battery.

If the issue is related to hardware, then depending on the issue, it may be possible to replace the damaged parts. If the issue is related to water damage, it could require comprehensive repair services.

If you’re having difficulty determining what is causing the issue, you may need to contact a professional for assistance. Professional phone repair services may be able to help you identify the issue and advise you on the best course of action.

How long does it take for your phone to turn on after it died?

The amount of time it takes for your phone to turn on after it died depends on a few factors, such as its battery type, how much charge it has left, any damage to the battery, and the type of phone. For example, most modern smartphones can turn on in a matter of seconds, whereas older phones might take several minutes or more.

Additionally, if the battery is completely drained, it may require more time to reach a level of charge that is sufficient to power the phone on. If the battery has suffered any damage, it may take even longer.

Furthermore, while some phones have the ability to “fast charge” and reach a certain level of charge quickly, others may require a more standard charging process. Ultimately, the amount of time it takes for a phone to turn on after it dies can vary dramatically, depending on the type of phone and the state of its battery.

How do you turn iPhone on after it dies?

If your iPhone has run out of battery and is no longer turning on, you can turn it back on by connecting it to a power source. Most iPhones come with a USB cable and wall adapter, which can be used to plug the device into an electrical outlet.

If the device still isn’t responding, try plugging the device into a computer or laptop. After a few seconds, the device should start to turn on and you can use it as normal. If your iPhone still isn’t turning on, you might need to reset it.

You can do this by pressing and holding the Home button and Sleep/Wake button (located on the top of the device) for about 10 seconds. The device should then restart and you should be able to access the home screen.

Why is my iPhone taking so long to charge and turn on?

IPhone charging and powering up can take a while for a variety of reasons. The battery could be low, or the phone could be running an update in the background. It could also be related to its charger or its compatibility with your current power source.

Older iPhones, or those with outdated charger cables, can take significantly longer to charge than newer models or those with original Apple chargers. If the power source isn’t providing adequate power to your iPhone, it will take longer to charge, regardless of its level.

Additionally, because of its complex hardware and software components, your iPhone can also take a longer time to turn on. Some users have also encountered problems with their phone not loading properly due to uncertified third-party repairs, or a faulty battery or power connector.

Ultimately, it’s best to check your iPhone’s charger, battery health, and power source to determine the cause of it taking so long to charge and turn on.

How do you know if your iPhone battery is completely dead?

If the battery in your iPhone is completely dead, it will not turn on when you press the power button. Additionally, the battery symbol in the top right corner of the screen will not appear, even when the phone is plugged into a power source.

If you plug your phone into a power source, and the battery symbol still does not appear, it is likely that your iPhone battery is completely dead. In some cases, you may also notice that the charging cable does not seem to make a connection between your phone and the power source, further confirming that the battery in your iPhone is likely completely defunct.

If you suspect this may be the case, it is a good idea to take your phone to a certified service center to have the battery checked and replaced if necessary.

What do I do if my phone charger is plugged in but not charging?

If your phone charger is plugged in but not charging, there are several steps you can take to try and troubleshoot the issue. First, be sure that the charger is plugged in correctly and that the wall outlet is working properly.

If the outlet appears to be in working condition, try using a different outlet. Additionally, check the cord and port of the charger to make sure that nothing is broken or bent. If the cords or port appear to be in working order, try using a different charger, as the one you are using may be the issue.

If this doesn’t work, check to make sure the phone settings are correct. This can include checking settings such as USB settings, fast charging settings, and USB debugging. If none of these steps solve the issue, it may be necessary to contact the phone manufacturer for further support.

What does iPhone look like when charging from dead?

When an iPhone is charging from a dead state, it may display a black screen with a red lightning bolt in the middle. The lightning bolt serves as a visual indication that the device is in the charging process.

Depending on the type of charger used, the lightning bolt may appear smaller than usual in order to indicate that the device is currently drawing a lower charge. After a few minutes of charging, the battery icon in the top right corner of the screen will be displayed to show the current battery level.

As the battery continues to charge, the icon will gradually increase in size as more battery power is available. Eventually, the battery icon will display a full charge, letting the user know that the iPhone is now ready to be used.

Does an iPhone charge faster when turned off?

No, turning off your iPhone does not cause it to charge faster. Your iPhone will charge as quickly whether it is turned off or on. The only way to charge your iPhone faster is to use a higher wattage power adapter (such as the one that came with the iPhone) and a high-speed USB port (such as the one found on the wall charger that comes with the iPhone).

Higher wattage adapters are more efficient in supplying power to the device and will charge your iPhone faster than a lower wattage adapter. Additionally, using a high-speed charging port will increase your iPhone’s charging speed even further.

Why does my iPhone only charge when its powered off?

It is possible that your iPhone is only able to charge when it is powered off because the device is not able to draw enough power from the charging port to operate and charge at the same time. The actual process of powering off and booting up your device can also require more power than what a weaker power source can provide.

Additionally, if the charging port on your device is dirty or broken, it may not be able to provide a strong enough connection to transfer power. Furthermore, a power source like a wall charger, usually provides more efficient charging, so it may be able to provide the power necessary to charge your device while it is powered on.

If you find that your iPhone charges only when it is powered off, it is advisable to try using different power sources, such as a computer with a USB port or different wall charger.