Skip to Content

What does Rush seat mean?

Rush seat refers to a type of seating ordinarily found at theaters or auditoriums. This type of seating is usually offered at a discounted rate, and is available on a first-come-first-served basis. Generally, rush tickets are not assigned seats and instead, the patron must line up before the show to get the best possible seat.

Many theaters even offer student or senior discounts for these seats, making them the perfect option for those on a budget. Rush seats are typically sold at the box office of the theater on the day of the performance, and the tickets are limited based on the number of seats available.

How much rush do I need for a chair?

When it comes to how much rush you need for a chair, it really depends on the type of chair. Rush is usually measured in square feet or linear yards, and the amount you need depends on the size of the chair.

For example, if you are making a small side chair, you might need between 12 and 18 square feet of rush. A larger chair, such as an armchair, might need up to 20 square feet. It’s also important to consider the factors of size, shape, and type of chair when determining how much rush you need.

For instance, a dining chair with a large back and arms may require more rush to cover the entire surface than a straight-backed chair. Additionally, if you’re using pre-woven rush, you’ll need to buy a bit extra in case some pieces are mis-sized or don’t fit properly.

When in doubt, it’s always best to err on the side of caution and buy a bit more rush than you think you’ll need.

What is the difference between caning and rushing?

Caning and rushing are two different types of furniture upholstery techniques. Caning involves weaving natural material such as rattan, wicker, or even bamboo into the seat of a chair to form an attractive patterned surface.

Rushing is a similar technique, in that it involves weaving materials, such as yarn or paper, through a woven base such as a hessian webbing or burlap fabric. Unlike caning, which typically makes a decorative pattern, rushing creates a textured effect on the furniture’s surface.

The technique dates back to the 18th century when it was used to provide furniture with a more comfortable feel. In addition to providing comfort and aesthetic appeal, both techniques are also known for their durability, making them a popular choice for many furniture upholstery projects.

Can rush seats be repaired?

Yes, rush seats can be repaired, depending on the material they’re made of. Rush seats are usually made of seagrass, paper fiber, or jute, and each of these materials can be repaired using different methods.

For seagrass, it can be cleaned and oiled to restore the original color and texture. For paper fiber, a repair patch can be cut and glued onto the seat and sanded down for a smooth finish. For jute, broken pieces can be pulled apart and woven back together with new fibers.

If you’re not comfortable attempting a repair on your own, you can also hire a professional furniture repair specialist to do it for you. They’ll be able to diagnose the issue, determine the best course of action, and ensure the seat is in good condition.

How do you clean rush seats on a chair?

Cleaning rush seats on a chair can be a tricky process and might require a bit more work than cleaning other types of chair materials. First, use a vacuum to remove any debris and surface dirt. Once the surface has been vacuumed, mix a solution of dish detergent in warm water and scrub the rushes with a soft brush.

Alternately, use a brush with soft, stiff dry bristles to clean the dirt away. Next, rinse the area with clear, cold water and let it dry completely. If the rush is stained or discolored, you can use a cleaning solution made up of two parts white vinegar and one part dish detergent.

Apply the solution, let it sit for a few minutes, and then scrub the area gently with a brush. After scrubbing, rinse again with clear, cold water, and let it dry. To prevent future staining, apply a protectant solution made of equal parts lemon oil and boiled linseed oil.

This will also help to retain color and protect the rushes from fading.

What does caning mean in slang?

In slang, the term “caning” is most commonly used in the United Kingdom to mean “thrashing” or “beating” someone, usually physically. Most often, the expression is used to describe a beating someone may receive in a rough altercation or fight.

It can also be used in a more figurative sense, to mean that someone was “defeated” in an argument or debate. For example, if someone felt they had been convincingly “caned” in a discussion, it could mean they were completely bested by the other person.

The term is also sometimes used, colloquially, to refer to the act of drinking heavily or recklessly, though this usage is much less common.

What happens during caning?

Caning is a form of physical punishment that is used to enforce discipline in some countries. It involves a heavy wooden stick, usually with a round end, being struck onto the buttocks of someone being punished.

The punishment is usually applied in a standing position, either over the clothing or, in more serious cases, directly on the skin. The strokes inflicted can vary in intensity and frequency, depending on the severity of the offense.

The effects of caning depend on the individual, with some people feeling a severe burning pain and others a more numbing sensation. Emotional reactions to the punishment may also vary, with some development a feeling of humiliation or anger.

In some cases, psychological trauma can result from the punishment.

Caning has been used in government-run schools and training course for decades, however it has been widely condemned by organisations such as the United Nations and Amnesty International, who believe that it is a form of torture.

This has resulted in the punishment being phased out in many countries, however it is still used as a form of legal punishment in some parts of the world such as Singapore and Malaysia.

How do you restore a rush seat?

Restoring a rush seat involves a few steps, but can be accomplished with everyday supplies. First, you should inspect the seat to identify any areas of damage such as torn or frayed rush or nails that have come undone.

Make any necessary repairs such as replacing missing or damaged rush strands or using a brad gun to secure the nails back into place. Once the repairs have been made, you will need to clean the seat with a mild soap and warm water.

This will help remove any dirt or dirt that has built up in the rushes over time. Allow the seat to dry completely before applying a generous coat of furniture wax. This wax will protect the rush and help to keep it in good condition for many years to come.

Finally, use a soft cloth to buff the wax for a glossy finish.

Can you paint over rush?

Yes, you can paint over rush. However, it is important to prepare the rush properly first so that your paint adheres well and doesn’t chip or peel off. First, you’ll want to make sure the rush is clean and completely dry.

Next, lightly sand the surface with a fine-grit sandpaper to remove any dirt, oils, or waxes, and to create a slightly rough texture that will help the paint adhere effectively. After that, use a tack cloth or a lint-free cloth dampened with water to remove any dust produced by the sanding process.

Finally, prime the rush with a latex primer, or a special furniture primer designed to help protect and preserve porous surfaces like rush. Once the primer has dried, you can apply your desired paint colors.

How long do rush seats last?

Rush seats are tickets that can be purchased last-minute at a discounted rate when a performance is sold out. They typically last only until the show begins, so once the show has started, there are no longer any rush seats available.

Additionally, the number of rush seats offered is dependent on the venue and show, with most offering around 10 to 20 rush seats per performance. The theater typically offers the same number of rush seats for each performance, so if there are only 10 rush seats available, they might be gone halfway through the preshow when the performance begins and won’t be offered again after that.

How much does it cost to re rush a chair?

The cost of re-rushing a chair depends on a variety of factors, including the size and type of chair, the materials used to construct the chair, the complexity of the rush pattern, and the amount of labor required to complete the job.

Costs usually range from $50 to $400, depending on the factors mentioned above. If the chair does not have a rush seat but you’d like to add one, the cost can be substantially higher and even exceed the cost of a new chair.

To get the most accurate estimate of the cost to re-rush your chair, it’s best to consult with a professional upholsterer who can evaluate your chair and provide a quote.

Do you get good seats with rush tickets?

The quality of the seats you can get with a Rush ticket depends on the show and the performance. Most shows will have seating charts posted, so you can see what kind of Rush tickets are available and where they are located.

Generally, Rush tickets are located in the back rows, and may also be located on the sides or in the balcony for some shows. They are usually quite discounted compared to regular tickets.

If you’re hoping to get good seats, it’s best to try and arrive early to get in line for rush tickets. Many shows that offer rush tickets usually have a designated spot outside the theater for people who wish to purchase Rush tickets, and the earlier you get there, the better selection of seats you can choose from.

Although Rush tickets generally provide quality seats, they can often fill up quickly, so it’s best to make plans to arrive early if you’re hoping to get the best seats available.

How does Broadway Rush tickets work?

Broadway Rush tickets are a great way for theater lovers to get discounted tickets to Broadway shows. These tickets are typically available for a limited amount of time, starting anywhere from a few hours before the show to the day of the show.

Depending on the show, Rush tickets may either be sold through the box office at the time of the show, or through digital channels such as the show’s website or a Broadway issuer’s app. Rush tickets are typically offered at a discounted rate, often less than half of the normal ticket price.

The number of tickets available depends on the show and the theater, but they can range from a handful to a few dozen.

It’s important to note that Rush tickets usually come with restrictions. Depending on the show and the theater, these tickets are often not permitted to be exchanged, and you may not be able to select your exact seat.

It’s important to check the theater’s website or the show’s website for details on the availability, restrictions and policies. You should also note that shows may designate certain dates as Rush-only dates, so if you can plan ahead, you may be able to save even more money.

How long do you soak fiber rush?

Fiber rush, a popular material for chair caning, should be soaked for approximately 30 minutes before attempting to install it. When soaking fiber rush, you should use hot water to help make the material more pliable for installation.

This can also help shrink the fibers, making it easier to fit on the chair frame. After soaking, it is important to squeeze out any excess water before beginning installation. It is also important not to let the material dry before installation, as this can lead to breakage and the fibers not correctly conforming to the shape of the chair frame.