AdvanTech T&G (Tongue & Groove) is a flooring system manufactured by Huber Engineered Woods. It is made from AdvanTech OSB (Oriented Strand Board) and features a tongue and groove profile that creates a tight seal between boards and firmly locks panels together without the use of fasteners.
This makes for a solid and stable flooring, ideal for both residential and commercial applications. It is resistant to moisture, shrinking and swelling, making it perfect for bathrooms and basements.
The superior construction provides superior strength as well as an acoustic benefit, making rooms sound tighter and more inviting. It is also easy to install and maintain, making it a popular choice for DIYers.
What is the difference between AdvanTech and OSB?
AdvanTech and OSB (oriented strand board) are both engineered wood products used in residential and commercial construction for floor and wall sheathing, as well as for roof decking. The primary difference between AdvanTech and OSB is that AdvanTech is a higher performance panel.
AdvanTech is manufactured from moisture-resistant, heat-cured adhesives, and moisture-resistant face and back surfaces, which make the wood more resistant to delamination and fungal growth. The wood used in AdvanTech is of higher grade, making it more dimensionally stable than OSB.
AdvanTech also has a higher resistance to swelling from exposure to moisture, allowing it to hold nails and screws better while reducing nail pops and other installation issues. OSB is typically made from a combination of softwood strands and adhesives, making it typically cheaper and easier to install than AdvanTech.
However, since OSB is more susceptible to moisture and fungal growth, it is not typically recommended for exterior sheathing, or any application where it may be exposed to large amounts of moisture.
What goes on top of AdvanTech subfloor?
A floor covering such as hardwood, carpet, laminate, tile, or vinyl should be installed on top of an AdvanTech subfloor. For best results, the floor covering should be installed according to the manufacturer’s instructions and all seams should be glued or nailed as necessary.
When installing hardwood flooring, it is also important to use a moisture barrier before installing the AdvanTech subfloor system. This will help protect the hardwood flooring from any moisture that may seep up through the subfloor.
Additionally, it is best to use a self-leveling compound to help ensure that the subfloor is properly leveled prior to floor covering installation. After the self-leveling compound has dried, the floor covering can then be installed according to the manufacturer’s instructions.
Should AdvanTech subfloor be nailed or screwed?
AdvanTech subfloor should be attached using the recommended specification listed in the Installation Guide of the product. Generally, when using the recommended specification, this would involve at minimum, nailing the subfloor to the joists.
However, in certain instances, such as rooms with a wider span or where a stiffer deck is desired, the manufacturer suggests screwing the subfloor in addition to or instead of nailing. Screws must be placed at or near the panel ends and edges, and throughout the field of the joists.
Any nails used should use a fastener pattern of 6 nails in a 6” pattern along panel edges and 12 nails in a 12” pattern throughout the field of the joists. Additionally, it is important to consider local climate and environmental conditions, as different products and fasteners are designed for different applications.
Can you tile directly to AdvanTech subfloor?
Yes, you can tile directly to AdvanTech subflooring. AdvanTech subflooring is made with a tongue and groove profile and can be applied directly over the floor joists or directly to the slab. When installing over floor joists, the subfloor panels should be secured with nails or staples and joined together with an adhesive at the edges.
When installing directly to the slab, it should be applied with an acrylic latex or modified adhesive. In either case, the subfloor must be clean, flat, and structurally sound before tiling. Once the AdvanTech subfloor is in place, you can install cement board on top for additional strength and stability before laying the tiles.
When tiling directly to the subfloor, be sure to use a modified thin-set adhesive.
How do I add a new layer to a subfloor?
Adding a new layer to a subfloor is relatively straightforward, but it does require some basic knowledge of carpentry. Begin by removing any existing flooring covering the subfloor and cleaning the surface.
That may involve scrubbing with an all-purpose cleaner, vacuuming, and or mopping as necessary.
Next, inspect the subfloor for damages or unevenness that may need to be corrected before laying a new layer. If a new layer is necessary to bring the subfloor up to standard, use a framing square and level to measure, mark, and trim the existing subfloor until it lays as flat and true as possible.
After the subfloor has been cleared and prepared, install the new layer. Depending on the room’s size, type, and shape of the subfloor, you may want to use either particleboard, plywood, or oriented strand board.
Secure it with self-tapping screws and a drill, ensuring that the new layer is properly fastened to the floor joists.
Finally, check the entire subfloor layout again and vacuum any dust or debris that’s been caused by the installation process. Once the floor is ready and free of any obstructions, it’s time to install your new floor covering.
This process may take several hours, so plan accordingly. With the proper tools and preparation, though, you’ll have a new layer of subfloor installed in no time.
Is AdvanTech subfloor waterproof?
AdvanTech subfloor is a high-performance engineered wood product made from wood fibers and moisture-resistant adhesives. It is composed of layers of wood strands laid in alternating directions and bonded together with a moisture resistant adhesive to provide a substrate that is both dimensionally stable and water-resistant.
While AdvanTech subfloor is water-resistant, it is not waterproof. This means that if the subfloor is exposed to water or moisture, it could still absorb and hold some of the liquid. Therefore, if there is potential for water to come in contact with the subfloor, it is important to use a moisture barrier between it and the concrete.
Additionally, it is important to follow manufacturer’s suggestions for the best application of both the subfloor and the moisture barrier.
Can AdvanTech be painted?
Yes, AdvanTech® can be painted to match any décor. AdvanTech® is made of smooth, pre-primed OSB which creates a remarkably consistent surface for paint adhesion. Make sure to use a premium quality latex paint for any painting.
Before applying the paint, it is recommended to sand the board in order to ensure that the paint is evenly distributed and applied consistently. After sanding, be sure to vacuum off any dust that may be on the board.
It is also recommended to apply two coats of paint to ensure that you get an even finish. After the paint is dried, be sure to inspect the job to get a professional-grade finish.
Is there a waterproof subfloor?
Yes, there is a waterproof subfloor option. This type of subfloor is typically made from fiber cement or plastic and is designed to provide a waterproof layer between the subfloor and the finished flooring of your home.
This type of subfloor is especially useful for wet areas such as bathrooms, laundry rooms, and entryways, as it helps to protect the finished flooring from water damage, mold, and mildew. When properly installed, it also serves to reduce the sound of foot traffic in the area.
There are a variety of manufacturers of waterproof subfloors available on the market, so it is important to do your research and find out which one is the best option for you.
Is AdvanTech moisture resistant?
Yes, AdvanTech is both moisture and mold resistant. It is a type of subflooring engineered with advanced moisture protection that is designed to resist water damage, moisture and mold. It is composed of Advanced oriented strand board (OSB) panels that have a moisture-resistant resin and sealed edges to prevent moisture from entering its core.
This makes it one of the most popular choices for low-slope roof and residential floor projects, as it can withstand wet conditions. AdvanTech also features a 3000-day no-sanding guarantee and its tongue and groove profile creates strong, tight joints that stay in place even when moisture is present.
This creates a stronger subfloor, allows it to be installed quickly, and provides superior long-term performance even in high-moisture areas.
What is the sub flooring to use?
The type of subflooring you should use depends on the flooring you want to install and the existing flooring you are replacing. For example, if you are replacing wood flooring with wood flooring, you should use plywood as your subfloor.
Plywood is a great choice as it has excellent stability, outstanding rigidity and resistance to flexing and warping. If you are replacing a solid floor such as ceramic tile with engineered wood flooring, then you could use concrete backer board as your subfloor.
This provides an exceptionally strong and stable base to install your flooring upon. If you’re installing laminate flooring in a below-ground-level basement, it’s recommended that you use either a foam backer board or a subfloor designed specifically with below-grade installation in mind.
This type of subfloor is designed to protect against moisture and its vapor barriers keep mold and mildew away. No matter what type of subflooring you choose, it should be smooth and level with good drainage and no areas with high or low points.
How thick should a bathroom subfloor be?
The exact thickness of a bathroom subfloor will depend on the size and weight of the bathroom fixtures, as well as the type of flooring that will be installed on top. As a general rule, a bathroom subfloor should be at least 1 1/8 inches thick, but it may need to be thicker if it is supporting a heavier fixture or there is additional load bearing in the area.
For example, a tile floor should have a subfloor that is a minimum of 1 ½ inches thick. Plywood and OSB are the most common types of subfloors used in bathrooms, but concrete can also be used in some cases.
It is important to ensure your bathroom subfloor is thick enough and installed properly in order to provide adequate support, prevent sagging, and avoid future moisture damage.
