The main difference between top fix and bottom fix toilet seats is the way they are installed onto the toilet. Top fix toilet seats are fastened to the toilet bowl at the top by the use of two bolts, which are accessed by lifting the seat up.
Bottom fix toilet seats are fitted at the bottom of the toilet using two plastic lugs and clips, which you can see when you lift the seat up. The lugs and clips fit over the two lugs on the base of the toilet bowl.
The method of installation affects how secure the toilet seat is once it’s in place. Top fix seats can often be more secure and are less likely to move or come loose over time. However, one disadvantage of this type of toilet seat is that the bolts can be difficult to access, especially if the seat is tight up against a wall or piece of furniture.
Bottom fix seats are generally easier to install and provide a less bulky look to your toilet, as the clips and lugs are hidden from view when the seat is in place.
Whatever type of toilet seat you choose, it’s important to ensure that it’s tightly fitted to your toilet so it doesn’t wobble or move around when in use.
Can you use a top fixing toilet seat on any toilet?
No, a top fixing toilet seat cannot be used on any toilet. In order for a top fixing toilet seat to be installed, the toilet bowl must have two pre-drilled holes for the hinges to fit. The two holes must also match up with the hinges of the toilet seat.
If your toilet bowl does not have these two pre-drilled holes, then you must purchase a bottom fixing toilet seat, which uses screws to attach to the toilet rather than hinges. However, it is important to check the measurements of your toilet bowl to ensure the bottom fixing toilet seat fits correctly and securely.
What is the top of the toilet seat called?
The top of the toilet seat is typically referred to as the lid or the cover. The lid or cover of the toilet seat serves two main purposes. The first is to keep the seat itself clean, as it can help to provide a barrier between the seat and any dirt or germs that may accumulate over time.
The second purpose of the lid or cover is to help provide a more comfortable experience when sitting and standing up. Some models are also designed to reduce any noise that may occur when the lid is opened or closed.
How do I know what toilet seat to buy?
Choosing the right toilet seat can be tricky, as there are so many styles, shapes, and materials to choose from. To help you narrow down your choices, consider the following factors:
Size: First and foremost, you’ll want to make sure the toilet seat you buy will fit your toilet. Measure the length, width and height of your toilet bowl to make sure any seat you buy will fit perfectly.
Shape: The shape of the bowl determines the shape of the seat. Elongated seats typically fit better on elongated toilet bowls and round seats fit better on round bowls.
Finish: The finish of the toilet seat determines the material from which it is made. Plastic seats are usually less expensive than seats made of wood or metal. Additionally, plastic seats are more durable and easy to clean.
If you’re looking for more of a luxurious look, you may want to invest in a wood or metal seat in a variety of finishes.
Lid: If you’re looking for a lid, be sure to select one that closes gently and quietly. There are many lid designs available, from soft close to a traditional push down.
Features: If you’re looking for something extra, there are plenty of toilet seats that feature additional features. Seats may include antimicrobial properties or may be heated or offer massage features.
You can even find seats with air deodorizing filters.
Once you have a better understanding of what’s available and which options are right for your toilet, you’ll find that selecting the right toilet seat has never been easier.
Why do people put cups under toilet seats?
People put cups under toilet seats for a variety of reasons. Generally, they are used to catch any water that may leak from the toilet tank. This helps to prevent water from running onto the floor and causing damage to the flooring or any surrounding furniture.
In some cases, a cup can also be put underneath the toilet seat to catch any urine that may drip from the seat itself. This can be especially useful in households with young children or elderly individuals who may have difficulty aiming properly.
Additionally, a cup under the toilet seat can be helpful for keeping the seat itself dry after someone has gone to the bathroom, helping to prevent any nasty smells from developing.
How do I remove a hidden toilet seat cover?
Removing a hidden toilet seat cover can be a tricky task, but with patience and the right tools, it can be done. First, make sure to turn off the water to the toilet to prevent any accidental flooding.
Next, it’s important to remove any screws or hardware that may be holding the seat in place – often stored underneath the seat or in the hinge area. Once these screws have been removed, you should be able to gently lift the seat and expose the hidden cover.
With the cover now exposed, there will be several screws around the edges that will need to be removed in order to detach the cover. Once these screws have been removed, you will be able to take off the cover and assess whether or not it needs to be replaced.
Finally, you should then be able to attach the new cover or reinstall the old cover, ensuring all screws are firmly tightened before simply reversing the steps and reinstalling the toilet seat.
Why can’t I unscrew my toilet seat?
It is possible that your toilet seat is not designed to be unscrewed. Most toilet seats are designed with a plastic nut and bolt that holds the seat in place and cannot be removed. This allows for quick and simple installation and removal of the seat without having to remove any screws.
If your toilet seat is not designed to be unscrewed, it will be difficult, if not impossible, to remove it without breaking the plastic nut and bolt. Another possible reason why you cannot unscrew your toilet seat is that it is rusted or corroded.
Because of this, you may be unable to get a grip on the nuts and bolts and unscrew them. In this case, it would be best to use a lubricant and wrench to try and loosen them up, or consult a professional for help.
How do you tighten a toilet seat with no access underside?
If you have a toilet seat that has no access underneath, there are a few techniques you can use to securely tighten the seat. First, you can use rubber washers, tightening nuts, and a screwdriver. The washers are installed on the underside of the seat and then the nuts and screwdriver are used to tighten them.
This will provide an even and secure fit.
Another method involves using nylon nuts and bolts. To start, attach the nylon nuts to the bottom of the toilet seat. Connect the bolts to the nuts and then tighten them together with a wrench. Make sure to check the tightness each time you make an adjustment to ensure a secure fit to the toilet.
Lastly, if your toilet seat has plastic hinges, you can use a plastic insert tool and a drill bit to create a tight fit. Start by removing the insert from the seat, and then use the drill bit to create a hole.
Put the plastic insert into the hole and twist it with the tool until it is tight. This will hold the toilet seat in place securely without damaging or marring the surface.
What are quick release hinges on toilet seat?
Quick release hinges on toilet seat are a type of hinge that allows the seat to be removed and reattached to the toilet bowl easily. This type of hinge is designed to allow for easy cleaning and maintenance of the toilet bowl.
The quick release action is usually enabled by two or more spring-loaded pins that can be pressed with a finger or a tool. This causes the hinge to unlock and the seat to separate from the toilet bowl.
To reattach the seat, the pins are depressed and the seat is pulled down until it is attached to the bowl. The quick release function is available on most standard toilet seats and many designer brands.
Quick release hinges on toilet seat provide easy access to the toilet bowl, making the cleaning process fast and efficient.
Do quick release toilet seats fit all toilets?
No, quick release toilet seats do not fit all toilets. These seats feature a mechanism that allows you to easily switch the seat in and out, so they will require some additional hardware. Therefore, quick release toilet seats are only compatible with certain types of toilets.
Before purchasing a quick release seat, you should check the information provided by the manufacturer to make sure that it is compatible with your toilet. Additionally, if you have an old-style toilet that uses a round lid, chances are that a quick release seat won’t fit.
In general, quick release toilet seats are designed to fit toilets with an oval-shaped opening. You may also need to check the dimensions of your toilet to make sure the seat will properly fit.
How do you remove a toilet seat from metal hinges?
To remove a toilet seat from metal hinges, you will need to determine which type of toilet seat hinge you have. If the hinges are the type where the nut is visible on the underside of the toilet seat, you can use a wrench to unscrew the nut.
If the hinges are the type with hidden bolts, you may need to use a flathead screwdriver to loosen the bolt that is located underneath the seat. Once the nut or bolt is loosened, you can remove the toilet seat from the hinges.
Some seats may also have plastic covers or caps over the hinge bolts. If this is the case, use a flathead screwdriver to remove the screw holding the plastic piece in place. Once the toilet seat is detached from the hinges, you can replace it with a new one if needed.
Why do toilets have soft close seats?
Toilets seats with a soft close feature are designed to help prevent injury from the lid or seat slamming shut. By providing a gentle, slow closure or “soft close”, it minimizes the risk of getting pinched in the closing gap and helps reduce noise, too.
In addition, the mechanism can help protect the seat itself, as well as the porcelain of the toilet bowl, from suffering damage caused by a slammed lid or seat. The slow-close feature is also beneficial for those with disabilities or limited mobility who may struggle with traditional open/close mechanisms.
The soft close mechanism helps make lid or seat closure easier and safer. This is why toilets with soft close seats are becoming increasingly common. Manufacturers of bathroom accessories are committed to providing quality products that are safe, comfortable, easy to use, and durable.
How do I know if my toilet seat is wood or plastic?
In order to determine if your toilet seat is made of wood or plastic, you will need to closely examine the seat. Wood toilet seats will usually be heavier than plastic seats, and they may be cool to the touch.
Wood often feels smoother and less textured than plastic toilet seats. Wood toilet seats may also have visible wood grain running through them, and often have more of a matte finish compared to plastic.
Plastic toilet seats may have a glossy or dull finish, and may feel slightly more textured than wood. If you’re unsure what type of material your toilet seat is made of after examining it, you can also look for a label or stamp on the underside of the seat that will indicate what type of material it is.
Is it better to get a wood or plastic toilet seat?
Whether you choose a wood or plastic toilet seat ultimately comes down to personal preference. Wood toilet seats are generally more attractive, as they can be stained or painted to whatever color matches your bathroom décor.
Furthermore, wooden toilet seats are stronger and more durable than plastic, meaning they will last longer. On the other hand, plastic seats are much more affordable and easier to install. Also, plastic toilet seats stay much cooler to the touch on hot days, and are less affected by humidity – so they might be a better option if you live in a humid or warm climate.
Ultimately, it is a personal choice. Consider the pros and cons of each type and make the decision that works best for you and your family.
