When measuring for a Roman blind, you should measure the total length of your window, from the top of the trim to the bottom of the sill. Generally, Roman blinds should be 2-3 times longer than the height of your window.
This allows the fabric to be gathered or scalloped when in the up position. However, if you do not want a lot of extra fabric showing on the sides when the blind is closed, you can measure just the window opening and add 1-2 inches to accommodate for trim molding.
Additionally, you may need to consider if the blind will mount outside the trim or inside depending on your window trim style.
Can Roman shade be longer than window?
Yes, Roman shades can be longer than a window. Some shades are made with a longer length to provide extra coverage and create a more luxurious look. Roman shades are often mounted inside the window frame and can hang up to several inches below the window sill.
This will offer more coverage of light-blocking fabrics from the sun and can also add a design statement to the window. The only caveat to be aware of is that when mounting hardware do not extend beyond the frame of the window because it can obstruct the window’s operation.
However, if desired, Roman shades can extend beyond the frame. It is a good idea to check with a professional window treatment installer before attempting this type of installation.
How far up do roman shades go?
Roman shades typically reach up to the top of the window, but the exact height can vary depending on the size and proportions of the window. They’re usually installed just above the inside frame, but in larger windows, they can stretch all the way up to the ceiling.
If the window is a bit wider than usual, some homeowners may opt for longer shades to create an even, tailored look. During installation, tension pulleys and hooks are used to adjust the fit for a perfect look.
Of course, the final installation height is entirely up to the homeowner. Additionally, roman shades can be installed to cover only the lower portion of the window if desired.
Can roman shades be too long?
Yes, roman shades can be too long. When measuring your windows for roman shades, you should measure to the length desired plus approximately 1/2″ or 1″. If you measure too much, the shade will be too long and will end up hanging down over the window.
This can be problematic as the shade can block natural light and create an awkward look. Additionally, if the shade is too long, it can impede the function of the window, making it difficult to open and close as desired.
To avoid this issue, be sure to measure your windows carefully and always double check your measurements when ordering.
Do Roman blinds look better in the recess?
Roman blinds can look beautiful in a window recess, or in any other window situation. Their simple, stylish lines, combined with the fact that they stack neatly when pulled up, can help them to fit into many different window configurations.
As they are lightweight and made up of fabric, they are relatively easy to install, and their non-intrusive design helps them to blend seamlessly into a space.
When placed in a window recess, they can really open up the space and can even help to make a small room look bigger. Since they hang down right to the window frame, they create a neat frame that is easy to clean and maintain, while still allowing natural light to flow into the room.
Roman blinds don’t take up any extra space in the room, and can add the perfect finishing touch to any interior style.
How far apart should the rods be on a roman blind?
The spacing between the rods on a roman blind should be appropriate to the size of the blind and the weight of the fabric. As a general guideline, the space should be 8”-12” apart for blinds up to 80” long, 12”-16” apart for blinds from 80”-240”, and 16”-20” apart for wider blinds.
However, if the blind is made from a heavier fabric, larger spacing may be necessary to ensure that the blind hangs correctly. Additionally, for wider blinds, if the rod spacing is too small, the blind may sag in the middle.
It is also important to note that if the rods are too far apart, the blinds may not stack evenly when pulled up.
How do you calculate Roman blind cord?
Calculating the necessary length of cord for a Roman blind is the final step of the make-up process. The correct length of cord for a Roman blind is dependant upon the size of the finished blind, the type of slide used, the configuration of the folds, the amount of fullness desired, and the length of the cords or weights attached.
For a roman blind intended to fit a window, begin by measuring the width of the window and adding between 1 to 3 inches on each side depending on the required ease of use. Multiply this new width by the desired fullness to create the finished width of the blind.
Next, measure the drops on the heading tape, the gaps between fabric pockets, and the bottom weight pocket and add them together to get the working drop of the Roman blind. This is the amount the blind must drop when fully open.
Once you have the finished size of the blind and the working drop, you’re ready to calculate the cord length needed. To do this, you’ll need to calculate the circumference of your blind, which is the distance around the outside perimeter, and multiply it by the number of pockets or cords, factoring in either four or nine times the finished drop depending on the design of the slide.
The final amount of cord needed should be equal to the amount of circumference divided by the number of cords or pockets, plus four or nine times the finished drop, depending on the slide.
If any raw edges are added to the Fabrics, it is important to add two inches for the hem. Lastly, add four or six more inches to allow an extra foot of cord at the bottom to allow for finishing.
How do you measure for roman shades on a mount?
When measuring for roman shades on a mount, it is important to take the time to make sure that the measurements are accurate. For inside mounts, you will need three measurements: the width of the window opening, the height of the window opening, and the depth of the window sill.
It is important to measure the width in at least three places (top, middle, and bottom of the window opening) and to use the smallest of these measurements when ordering the roman shades. The depth of the window sill is also important; if the space between the window sill and the window casing is shallow, the roman shade manufacturer may need to take that into account when making the roman shades.
For outside mounts, you will need four measurements: the width of the desired coverage area, the height of the desired coverage area, the distance from the desired coverage area to the window opening, and the depth of the window sill.
Like with inside mounts, it is important to measure the width in at least three places (top, middle, and bottom of the opening) and to use the smallest of the measurements when ordering the roman shades.
Whether you are doing an inside mount or an outside mount, it is important to measure the window opening (or coverage area) in at least three places to make sure you have the most accurate measurements.
It is also important to remember to measure the depth of the window sill, as that can affect how the roman shades are made. Taking care when measuring will ensure that you get the right size and fit for your roman shades on a mount.
Should roman shades be inside or outside mount?
When it comes to deciding between an inside or outside mount for roman shades, it really comes down to personal preference and the look and feel you are trying to achieve. Both options have their pros and cons, so you should consider all the factors before making a decision.
An inside mount provides a sleeker and more modern appearance, since it is mounted within the window frame and the shade hangs flat against the wall. This usually maximizes the amount of light that can enter the room and also helps to create a more open, spacious feel.
Inside mounts can also help create better insulation and privacy, so it’s a great option if you want to save energy and increase security.
An outside mount for roman shades provides a more traditional look and increases their visual impact. Hanging a shade outside of the window frame creates an illusion of more space and can help draw the eye in an unexpected direction.
It also offers more flexibility for awkward window shapes or positions, as well as the opportunity to make a bold statement with patterned or colourful fabrics.
It’s important to remember that the window treatments you choose should suit both the look and feel of your room, and the inside or outside mount should be based off of that. Ultimately, it is up to you as long as both options have enough room to function correctly and safety considerations are met.
What are the different types of roman shades?
The different types of Roman shades include:
1. Flat Roman Shades: Flat Roman shades have smooth, tailored lines and have an emphasis on texture or pattern. These shades have an unobtrusive, economical look and are well-suited for modern and contemporary decor.
2. Casual Roman Shades: The most common type of Roman shade, casual shades have simple horizontal folds on the front and back for a classic and relaxed look.
3. Soft Folds Roman Shades: Soft folds Roman shades are more luxurious options which are made from thicker fabric and feature folds that result in a classic and elegant look.
4. Hobbled Roman Shades: The hobbled Roman shade has an extra layer of fabric along the back for an aesthetically pleasing look and rich texture.
5. Relaxed Roman Shades: Relaxed Roman shades are decorated with folds, pleats, and wraparound hems, which give a homely, warm feel. The classic, relaxed look can be further enhanced with drapery and accessories.
6. Contrast-Band Roman Shades: The contrast-band Roman shade has horizontal band running across the fabric, providing a distinctive look and enhanced visual contrast.
7. Cascade Roman Shades: Cascade Roman shades have large overlapping pleats and create a waterfall-like effect when pulled up. This style creates a modern, streamlined look that is especially suitable for contemporary spaces.
8. Inverted Pleat Roman Shades: The inverted pleat Roman shade is made of fabric that is gathered at the base and features an egg-shaped pleat that helps keep the shade from sagging.
How much depth do you need for inside mount?
For an inside mount, you will need at least three inches of depth in addition to the window’s width and height. This is to ensure that the window covering will fit snugly in the space, leaving a neat and tidy look.
As many window frames are not perfectly square, you may want to opt for more than three inches of depth for a better fit. If the window frame is less than three inches deep, then an outside mount may be a better solution for your window covering needs.
Additionally, you will want to consider the weight and size of your window covering when calculating the necessary depth for an inside mount, as this will determine how much space the window covering will need.
How much longer should roman shades be than window?
Roman shades should be 3-4 inches longer than the window for the most polished look. This allows for proper gathering and fullness of the shade, which looks more put together and prevents extra sunlight from coming in around the edges.
Additionally, this is beneficial for ensuring enough coverage for the window. If a larger amount of coverage is desired, an extra 6 inches of length can also be added on top of the 3-4 inch overlap. Ultimately, the length should be determined based on the desired look, light coverage desired, and the window size.
Should Roman blinds touch the window sill?
It really depends on the size of the window sill and the blinds themselves. Ideally, Roman blinds should not touch the window sill underneath them. This is due to the fact that if the blinds are too long, they will be difficult to open and close.
Similarly, if the blinds are too short, they will not be able to completely obscure a view when closed, thus defeating their purpose. The desired length for Roman blinds is typically about an inch or two above the window sill.
Therefore, if the window sill is particularly deep, it may be necessary to have the Roman blinds hang higher from the window in order to preserve their desired length and functionality. For this reason, the height of the window sill will largely dictate how low the Roman blinds should hang in order to achieve the desired aesthetic.
How much window do you lose with a roman blind?
When it comes to the amount of window space you lose out on when using a roman blind, it really depends on the style of blind you choose. For instance, if you opt for a flat roman blind, you won’t be losing out a lot of window space.
On the other hand, if you go for a more luxurious look with a hobble roman blind, you may lose out on a little more window space due to the fuller look of the blind. Generally speaking, the more pleated the blinds, the more space you may lose out on.
Additionally, if you decide to add extra cloth, such as a valance or cornice, then you may end up losing out on a bit more window space as you’ll need to accommodate the extra fabric. It is also important to consider whether your window opening is overlapped or butt stacked when it comes to measuring the amount of space you lose out on with a particular style of roman blind.
Ultimately, the best way to judge the amount of window space you may lose out on with a roman blind is to measure the exact size of your window before purchasing a blind so you can calculate the exact amount of space you will lose.
Are Roman blinds more expensive than roller blinds?
Whether Roman blinds are more expensive than roller blinds depends on the type of fabric, the size, and the design. On average, Roman blinds tend to be more expensive than roller blinds because they require more fabric and a higher level of craftsmanship.
Additionally, Roman blinds require higher quality hardware for lifting and lowering, resulting in an additional cost. As an example, a standard 100cm x 200cm window would cost approximately £50-£200 for a roller blind, whereas a Roman blind of the same size would be more expensive at £60-£300.
Custom-made designs, fabrics, and sizes can increase the cost even further. Ultimately, the cost difference between Roman and roller blinds depends on individual factors, so it’s best to compare the costs of specific products to get an accurate idea of the price range.
Can I shorten Roman shades?
Yes, you can shorten Roman shades. The process is simple, but it is important to follow the correct steps to ensure that the shade is safely and securely shortened. First, measure the height of the window to determine how much of the length of the shade you need to remove.
Once the length has been determined, use a ruler to mark where the shade should be cut. Make sure to leave a couple of inches for securing the bottom hem. Then, find a pair of sharp scissors and carefully cut off the excess material.
Next, you can remove any hems that are no longer needed and then reattach the bottom hem using a sewing machine or hand stitching. Once the hem is in place, you can use a staple gun or tack the fabric to the back of the headrail to get a custom fit.
Finally, re-install the shades in the window and adjust the tension on either side of the window to ensure a smooth sliding motion when opening and closing the shade.
What’s the difference between Roman shades and Roman blinds?
Roman shades and Roman blinds are both window treatments used to provide aesthetic and functional advantages to a room. The distinction between these two window treatments lies in the way they are constructed.
Roman shades are made from one piece of fabric that is either flat or pleated, and when raised, folding cascades in a series of neat pleats across the window. On the other hand, Roman blinds consist of a series of overlapping horizontal slats that are connected together.
Both shades and blinds can be opened or closed using a string-style mechanism and can provide excellent light and privacy control depending on the desired opacity of the fabric. The choice between the two is ultimately a matter of personal preference, as both can give a similar aesthetic contribution to the room in terms of pattern and texture.
Do you put curtains with Roman shades?
Yes, using curtains with Roman shades is a common way to both add to the decor of a room and to add privacy. Roman shades are formed into neat pleats when they are opened and can provide a stylish look when used with curtains.
Curtains can be draped over the Roman shades or can be hung separately to add additional color and pattern to the room.
If you already have Roman shades on the windows but want to include curtains, you can easily hang them separately. They look great when draped on either side of the Roman shades or when draped only across the top, allowing the shading to remain visible.
For a uniform look, choose curtains of the same color as your Roman shades. If you want a more vibrant look, you can choose curtains in a coordinating color or pattern to add more interest.
Roman shades are a great window treatment option as they can be custom designed to fit any size window. And, when combined with curtains, they can add a true designer look to the room.
Are Roman blinds still fashionable?
Yes, Roman blinds are still fashionable and continue to be a popular choice for many homes and offices. Roman blinds are an ideal window covering for controlling light and privacy levels, as the fabric folds neatly into horizontal pleats when opened, creating a contemporary and stylish look.
They’re also perfect for smaller windows as they take up minimal space. The collection of Roman blinds available today offer a modern take on classic window treatments, with a variety of colors and textures available to suit any style.
If you’re looking for longer-lasting curtains or blinds, the high-quality fabrics used to manufacture Roman blinds will ensure that your window treatment looks great for years to come.
What is a reverse fold Roman shade?
A reverse fold Roman shade is a type of window treatment that utilizes two layers of fabric attached to a flat headrail. The material gathers when the blind is raised, creating a look of pleated fabric that cascades in a downward manner from the headrail.
The fabric is attached to the flat headrail at the top, typically using a clamshell headrail, where the fabric wraps around the top and is attached on the back side. It then cascades in a downward manner and is attached to the bottom back side of the headrail, creating the pleated look.
When the blind is drawn up, the pleated fabric layers reverse fold on top of the headrail, providing a clean look from outside the window but still offering style and privacy within. These types of Roman shades are ideal for those who want to add a bit of style and softness to the space and provide a calming atmosphere.
