A Husqvarna weed eater uses a 0.095” line size. This line size can be used with online Husqvarna trimmerhead models 129L, 128LD, 128L, 124C, 124L, 124LD, 122L, 122LD, 327LDX, 324LX, 324LDX, 223L, and 223R.
As long as the proper size is used, this line size will work with most of Husqvarna’s trimmer models. If you have an older trimmer model, double-check to confirm that the 0.095” size line is compatible.
How do you restring a Husqvarna weed eater?
Restringing a Husqvarna weed eater is easy and can be done in four simple steps:
1. Prepare the area for restringing by disconnecting the spark plug wire, if applicable, and clearing the area around the spool.
2. Remove the old string with a screwdriver. Carefully remove the spool so it can be replaced with a new one.
3. Start with the new spool and begin restringing it. Thread the line through the designated holes inside the spool. Continue to add the line until it is full.
4. Once the new string is loaded inside the spool, carefully reassemble the spool onto the weed eater. Give the line some slack so it can move freely, then secure the lid.
Once the spool is reattached, you can start using your weed eater again. Be sure to wear safety glasses to protect your eyes from flying debris.
What size weed eater string do I need?
The size of weed eater string you need will depend on the make and model of your weed eater. Generally, the manufacturer will specify the size you need in the user manual that came with your weed eater.
The size is generally printed on the spool of the string and will usually be written in millimeters, such as 2.0 mm, 3.0 mm and so on. If you still cannot find the size, double-check the manual, or if you no longer have the manual, you are able to find it online.
The most common sizes are 1.5mm, 2.0mm, 2.4mm and 3.0mm. It’s important to use the exact size specified by the manufacturer as using a different size can cause damage to the trimmer head.
Does it matter what trimmer line you use?
Yes, it does matter what trimmer line you use as different types of trimmer line come with different features like thickness and flexibility which are essential for different tasks; it also affects how well your trimmer performs and how long the line will last.
The type of trimmer line you should use depends on the type of job you are doing. For example, heavier trimmer lines are more suitable for handling thick areas of grass because they are thick, flexible and durable.
For light trimming, you may want to opt for a thinner and more flexible line. You should also use the recommended line for your particular trimmer model for optimal performance.
What can I use instead of weed eater string?
One of the most popular alternatives to weed eater line is a synthetic trimmer line, which comes in different shapes, sizes and colors. This line is manufactured by several manufacturers and is often made of light-weight and durable plastic or nylon.
Unlike normal line, this synthetic material is non-abrasive and should provide better longevity and more reliable performance. Additionally, some of these lines are made specifically to resist tangling and are resistant to weed-eater vibrations and imbalanced loads.
Additionally, they can be used on a variety of different trimmers and they are available in many different lengths, widths, and colors. Some users have also found success using metal blades and diamond blades instead of a weed eater line.
Depending on the type of work you are doing, these blades can sometimes give better performance than the traditional string. However, you would need to be aware of the type of debris you are cutting and make sure you are using compatible blades for your specific project.
Are all weed wacker strings the same?
No, not all weed wacker strings are the same. Weed wacker strings come in a variety of sizes and types designed for different uses. The size and type of string you use will depend on the shape, size, and strength of your weed wacker as well as the type of terrain you’ll be working on.
For example, small and lightweight lines are ideal for edging and trimming, while thicker and stronger lines are better for heavy-duty tasks such as clearing tall brush. You may also want to consider strings that are designed for specific conditions, such as shorter lines for wetter or more slippery terrain or longer lines for rough terrain.
Ultimately, the size and type of string you choose should depend on the type of job you have in mind and your weed wacker’s capabilities.
What size string goes on Stihl weedeater?
The size string that you need for a Stihl weedeater will depend on the model and type of machine you have. Generally, most weed eaters use either. 095 or. 105 twisted line, but a few models use. 130 line as well.
The best way to determine the size of string you need for your Stihl weedeater is to consult your manual or contact the manufacturer. Additionally, you can look at the spool or the head of your weedeater and check the specs there.
Once you know the size, you can purchase the right string for your weedeater at a local hardware store or online.
Why does my string trimmer line keep breaking?
One of the most common reasons is simple wear and tear. Over time, the line can wear down and become weakened, leading to it breaking when you use the trimmer. Another possible cause is if the line is being used at the wrong length.
Too long of a line can cause it to become tangled and break, so make sure it is cut to the correct length for your trimmer. Finally, an incorrectly adjusted trimmer head can also cause the line to wear out quickly and possibly break.
Make sure that the trimmer head is adjusted correctly, and that it is securely in place before using your trimmer. If your line is still breaking after doing these few things, you may need to purchase a new line for your trimmer.
How do you fill a Husqvarna trimmer line?
To properly fill a Husqvarna trimmer line, you will need to begin by disconnecting the spark plug wire. Next, remove the trimmer head cover and inspect the inside. If there is any old line in the head, remove it and discard.
Finally, thread new trimmer line into the eyelets located in the head. Wrap it around the spool in a clockwise fashion following the arrows embossed on the spool. When finished, make sure the line is completely wound tightly around the spool and snap the head cover back into place.
Reconnect the spark plug wire and start the engine to ensure the line feeds properly.
How long should the trimmer line be?
The length of the trimmer line you should use will depend on the type of trimmer you have and the job you need to do. If you have a gas-powered trimmer, you should use a line that is at least 0.095 inches thick.
If you have an electric trimmer, you should use a line that is at least 0.065 inches thick. As for the length of the trimmer line you should use, it should be between 8 and 15 inches long. If you are using the trimmer to trim smaller, more precise areas, a shorter line should be used, while a longer line is more suitable for bigger areas.
Regardless of the type and length of line, you should make sure you always use the size and length recommended by the manufacturer to ensure that your trimmer is running optimally and that you are not causing any damage to your trimmer, the trimming area, or yourself.
How do you load a fixed line trimmer head?
Loading a fixed line trimmer head is a relatively straightforward process.
First, make sure the trimmer is off and unplugged. If the trimmer uses a recoil starter, make sure the rope is not engaged. Then, locate the spool housing, which is usually located on the top of the trimmer head.
It houses the spool, a plastic or metal cylinder that holds the trimmer line.
Use a screwdriver or other flat tool to unscrew the retainer bolt, or whatever is keeping the spool in place. As the spool is removed, it will expose the trimmer line inside the spool housing. Check the length of the line and make sure it is the correct length for your trimmer’s cutting width.
If not, familiarize yourself with the length chart for your model of trimmer so you can determine what length to use.
Once the line is the correct length, thread it onto the spool. Start at one of the two notches at the end of the spool, then wind it around the spool several times. You may find it helpful to use a winding tool – this helps keep the line snug and even as you wind it around the spool.
Once the line is fully wound, cut off the excess line and reinsert the spool into the housing. Secure it with the retainer bolt.
Finally, test the trimmer before you use it. Start the engine and check to make sure the head is spinning. Then, test the trimmer along outside edges, like driveways and sidewalks, or any curves. Make sure to check the line for wear and tear, and if necessary, repeat the process to add more line.
And that’s it – when done correctly, your trimmer should be loaded and ready to go.
