Skip to Content

What size staples go in a staple gun?

The size of staples that will go into a staple gun depends on the type of staple gun that you have. Generally, staple guns come in two sizes: heavy duty models and light duty models. Heavy duty staple guns are designed to take longer and thicker staples, while light duty staple guns accept shorter and thinner staples.

The most common sizes of staples for staple guns are 3/8 inch (9. 5 mm), 1/2 inch (12. 7 mm), and 5/8 inch (15. 8 mm) in leg length. You should only use the staples specifically designed for your particular staple gun model.

Using the wrong size or type of staple could damage the gun or make it difficult to use.

What are the different sizes of staples?

There are several different sizes of staples available to accommodate different materials and projects. The three most common sizes are:

1. Heavy Duty Staples: These are typically between 1/4 and 9/16 inches long and work best for harder materials such as wood, plastic, heavy fabrics, and upholstery.

2. Standard Staples: These are usually between 1/4 and 5/16 inches in length and are suitable for everyday office use, such as standard copier paper and light fabric.

3. Mini Staples: These are the smallest type and typically measure between 1/8 and 5/32 inches in length. They are suitable for attaching small documents or lightweight paper.

It is important to note that alongside the different staple sizes, there are also different types of staples. Staples are typically made of either wire or plastic, and can have different shapes, such as square, chisel point, or diamond point.

Their width can also vary, often ranging from 1/4 to 9/16 inches. When selecting staples for a project, it is important to choose the right size and type for the intended materials and use.

What size staple should I use?

The size of staple you should use depends on the size of the items you are stapling together and the type of stapler you are using. If you are using a standard hand-held stapler or electric stapler, then you should use those types of staples (sometimes labeled as 26/6 or 24/6 staples).

If you are using a heavier-duty stapler, then you should use heavy-duty staples, sometimes labeled as 23/8 or 23/12 staples. Additionally, if you are using a multi-purpose stapler, you will need both sizes of staples, as they allow you to staple into heavier materials, such as cardboard.

Ultimately, a good rule of thumb is to refer to the instructions that came with your stapler to determine the size of staple that should be used.

What size is T50 staple?

A T50 staple is a popular type of medium-duty staple that typically measure 1/4 inch in length. This size is ideal for light fastening and upholstering applications such as attaching fabric and paper to wood and other hard surfaces.

The T50 staple is the industry standard for most staplers and can handle the stapler’s standard max staple capacity. It is available in both flat clinch and standard varieties that fit most standard staplers.

Are T50 and 140 staples the same?

No, T50 and 140 staples are not the same. T50 staples are intended for use in fine stapling applications, such as documents and thin sheets of paper. They are made from stainless steel and are shaped so as to exert less force on the materials being stapled.

They have a diameter of 0. 5mm and can staple up to 15 sheets at once.

On the other hand, 140 staples are designed for heavier duty stapling applications and are made from coated steel. They are higher in strength and more heavily galvanized to provide a durable and corrosion-resistant staple.

They have a diameter of 1. 4mm and can staple up to 20 sheets of paper at once.

How do I choose staples?

Carefully.

There are a lot of different types of staples, and each one has its own benefits and drawbacks. The type of staple you choose will depend on the material you’re working with, the size and thickness of the material, and the intended use for the finished product.

Some common types of staples include:

– Heavy-duty staples: These are designed for use with thick or heavier materials, such as plywood or particle board. They have a strong hold and can penetrate deep into the material.

– Light-duty staples: These are designed for use with thinner materials, such as paper or fabric. They have a lighter hold and can be less likely to penetrate deep into the material.

– All-purpose staples: These staples can be used for a variety of materials and are a good choice if you’re not sure which type to use.

– Drawing pins: These are small metal pins that are ideal for use with paper or lightweight fabric. They have a very small head and can be difficult to remove, making them a good choice for temporary applications.

What are T50 staples used for?

T50 Staples are used in a variety of applications, such as upholstery, insulation, roofing, flooring, and other construction applications. They are also used to close and attach many types of materials together.

These staples are generally used to create a more secure bond than a nail or screw alone, making them a viable choice for materials that need to remain in place for a long period of time. T50 staples are designed with a thicker gauge wire than most staples, making them able to stand up to tougher conditions and last longer.

Because of this durability, they are popular for securing fabrics, thicker materials, and multiple layers. They can also be used in conjunction with other types of fasteners to make complex fastening systems like those used in roofing and construction.

What does the number mean on staples?

The number on Staples typically refers to the item number of a specific product. This number is used to help identify the product when looking up information in the store’s catalog or when ordering the item online.

The number may also be used for tracking shipments and for placing orders. Having this item number handy when ordering online or over the phone can make the process quicker and easier.

What gauge staple is T50?

T50 staples measure approximately 6 mm in length with a 0. 7 mm diameter, which corresponds to a gauge of 17 (17/1000 of an inch). T50 staples are the most commonly used type of staple and are compatible with most heavy-duty staplers.

They are commonly used for materials such as insulation, carpeting, and upholstery, and they have an excellent holding power. Since they are so popular, they are easy to find and typically sold in boxes of different quantities.

Are T50 staples narrow crown?

No, T50 staples are not narrow crown staples. These staples are wide crown staples, designed for a maximum sheet capacity of 45-50 sheets. The staples are typically used for heavy duty fastening applications such as upholstery, roofing, insulation, and carpeting.

They are typically made of steel and designed to be corrosion resistant which makes them ideal for outdoor use. The staples are designed to fit a wide variety of heavy duty staplers and applications.

How do you read staples sizes?

Reading the size of a staple requires familiarizing yourself with the most common staple sizes and their measurements. Some of the most common sizes include:

⁃ No. 10 Normal Wire or ½” length – The size of a No. 10 staple is 0.5 inches in length. This is the most commonly used staple size.

⁃ No. 13 Heavy Duty or 9/16” length – As the name implies, this size is slightly larger than the No. 10 staple and measures 9/16 inches in length.

⁃ No. 16 Extra Heavy Duty or 11/16” length – This staple is even longer than the No. 13 and measures 11/16 inches in length.

⁃ No. 17 Ultra Heavy Duty or ¾” length – The largest staple size available, the No. 17 measures 0.75 inches in length.

You can easily measure the length of the staple by laying it flat on a ruler or using a pair of calipers. Generally speaking, the larger the number of the staple, the longer its size. By familiarizing yourself with these sizes, you’ll be able to quickly and accurately read staple sizes.

What is the difference between T50 and JT21 staples?

T50 and JT21 staples are two different types of common staples used in both stapling machines and hand-held staplers.

T50 staples are generally considered the more common type, and are usually found in most generic office staplers. They are just over half an inch long, and feature two legs with a curved crown. These staples are designed to be driven into thinner materials, such as paper, thin cardboard, and thin fabric.

JT21 staples are similar in shape and size to the T50 staples, but feature slightly different legs and a sharper crown. These staples are made from thicker, more heavy-duty materials, and are able to penetrate thicker material, such as thicker card and upholstery.

This makes them useful when more heavy-duty stapling work is required.

In conclusion, T50 staples are more commonly used for general stapling in office applications, while JT21 staples are better for stapling thicker material.

Do all staplers use the same staples?

No, not all staplers use the same staples. Different types of staplers require different types and sizes of staples. For example, heavy-duty staplers may require larger staples than smaller swingline staplers.

Likewise, certain staplers may require specialized staples with unique shapes or contours that your standard stapler may not be able to use. Other specialty staplers may require a different type of staple altogether, such as wire staples.

So it’s important to make sure that you’re using the right type of staple for your particular stapler in order to ensure optimal performance.

Are staple guns universal?

Staple guns are not universal, but rather, each one is purpose-built for different applications. Depending on the job you are doing, you’ll need to select the right type of staple gun for the task. There are manual, electric, and pneumatic (powered by air) staple guns available.

Depending on the size of your project, the type of material you are working with, the density of the material, and the type of staples you are using you’ll need to select the right type of staple gun.

For instance, a manual staple gun is great if you’re only working on lightweight projects, such as fabric or wrapping paper. An electric staple gun is perfect if you have thicker materials that need tacking down, such as roofing felt, insulation, or carpeting.

And if you’re installing something heavy-duty like sheathing, drywall, or roofing shingles, you’ll want to use a pneumatic staple gun as they have more power and drive the staples deeper into the material.

Additionally, you’ll need to check the size of the staples the gun is made for to ensure they are able to penetrate the material you are working with.

Leave a comment

Your email address will not be published.