French doors typically come in a variety of standard widths, depending on the manufacturer and design. Common standard widths include 24, 28, 30, 32, 34, 36, 48, and 60 inches. Additionally, many French door manufacturers offer customizable widths and adjustable sizes as an option.
In particular, custom or adjustable widths may be ideal if you have an oddly-sized space that requires an uncommon door width. For example, if your space is 47 inches in width, adjustable French doors could be widened or narrowed to fit perfectly without sacrificing style or energy efficiency.
What are the narrowest French doors?
The narrowest French doors may measure only 30 inches. These narrow doors are ideal for tighter spaces such as closets, pantries, and laundry rooms, and are typically composed of a single large panel of paned glass supported by two half-hinged doors.
They are often installed with a slim frame, meaning the entire door unit is much smaller than a regular sized door. These doors are available in a variety of materials, including wood, plastic, and metal.
They can also come with several features, such as UV protection to help reduce fading from the sun, or frosted glass for added privacy. The narrowest French doors can add a touch of elegance to a space that has limited space, while still allowing natural light to filter in.
How wide of an opening do you need for French doors?
When it comes to the width of an opening for French doors, a rough opening of approximately twice the width of the door’s frame, plus a few inches for the jamb, is the recommended size. This will provide enough space to properly install and seal the doors.
For example, if the two French doors were to be 36” each, then the rough opening should be approximately 78”. If you are installing a single French door, then the opening width should be two times the width of the door, plus a few extra inches for clearance.
If you are installing a pair of French doors, however, then the width should be double that of each door. It is important to note that the opening can sometimes need to be slightly wider or narrower depending on the specific design of the door.
In addition, the opening height should be roughly 6 inches more than the combined height of both doors. Therefore, if the two doors are 80” tall combined, then the opening should be roughly 86”.
What is the difference between a French door and a double door?
A French door is a type of door, usually exterior, consisting of two or more panels that open and allow passage into or out of a room. French doors are typically composed of either a single glass pane or a number of small panes, referred to as “lites”, that are framed together and divided by wood or metal mullions.
The lites may be fitted with a variety of glass options, such as Low-E, tinted glass, or decorative grills for added security and privacy. A French door typically swings outward when opened and is hung at the center of an opening.
A double door is a door with two leaves that open in the middle, similar to French doors. This type of door is generally used to create an inviting and spacious entrance. A double door is hung with two pivots located at the center of the door and is typically opened outward.
The two doors are mounted separately and meet together at the center, which is secured with a latch, lock, or other locking device. There can be several glass lite options available in a double door, but they may be less diverse than those found in French doors.
Do French doors increase home value?
Yes, French doors can increase home value in a number of ways. French doors provide a classic aesthetic that can instantly increase curb appeal, making it easier for prospective buyers to fall in love with a home.
Additionally, when open, French doors can also let in natural light and air, creating an inviting and comfortable atmosphere in any room. As a result, French doors can make a home appear larger, brighter and more inviting, while also allowing a homeowner to easily configure the flow of air and light between their indoor and outdoor living spaces.
Finally, since French doors have become something of a modern standard, many buyers may actively seek out houses with French doors, making them something of an expected amenity. All of these factors create an attractive home with increased assessable value.
Are French doors better than sliding doors?
It really depends on your specific needs – both French doors and sliding doors have their own advantages. French doors are very attractive and can allow for more natural light to come in since there are two doors instead of one sliding panel, but you do need adequate space for them to open up and close properly.
Sliding doors are more space-efficient and can be a great option for tight areas with minimal space clearance. They are also relatively low-maintenance and don’t require the space that French doors do.
Both types of doors can be made of a variety of materials and provide good insulation. In the end, it depends on the size of the opening, access needs, overall look, and budget of your space.
Is a French door a double door?
Yes, a French door is a type of double door, typically consisting of two large wooden or metal panels separated by a narrow panel inside and/or outside the door frame. They are traditionally made of wood, but are increasingly being made of metal as well.
Compared to a single door, a French door provides more light and visibility into the interior space. The glass panels on either side also provide an airy, open feel to a home. The classic styling of French doors lends a timeless elegance to any space and they are a popular choice for entryways and patios, as well as for adding more light to a home.
What makes a door a French door?
A French door is a type of door that typically consists of two outward-opening, narrow doors that swing outside the door frame. They often have clear, glazed panels at the top of each door, with a matching set at the bottom that is commonly referred to as a “French window”.
These glazed panels provide natural light, ventilation, and an unobstructed view of the outdoors. French doors are commonly constructed with wood, often with tall panels that extend from the bottom of the door to the top.
Along the door’s sides are usually slim panels, referred to as “muntins”. Aside from their distinctive looks, French doors are well-liked for their superior ventilation and accessibility. Besides, they are considered a great option for brightening up small spaces or for framing a stunning natural view of a garden.
French doors also make for a good security feature as one would need to open both doors to gain access.
Do both doors open with French doors?
No, French doors usually consist of two individual doors that swing open in opposite directions and are either attached to a wall with hinges, or hung with a pivot. They can be made out of a variety of materials, including wood, glass, or metal.
They open by pushing the handles outward and often do not have locking hardware. French doors can provide an area with a view of the outdoors and an outdoor feeling inside. However, they are not a practical choice for high-traffic areas, as their movement can get in the way of traffic and impede circulation.
French doors also do not work well in tight spaces.
What do you call a double door?
A double door is a type of door that consists of two adjacent doors that are usually hung on hinges and open in the middle. They are usually used as entry or exit points in large buildings, such as stores, offices, and schools.
Double doors are usually found in pairs, however variations exist such as a single door with two panels, commonly referred to as French doors. Double doors provide an efficient, aesthetically pleasing way to enter or exit an area while also providing security and privacy.
What is the gap between double doors called?
The gap between two double doors is usually referred to as the double door threshold. This threshold is important because it helps to provide a physical barrier between two spaces in order to protect the occupant.
It is also important because it provides an additional layer of insulation and soundproofing to a room. When choosing a threshold, it is important to consider the size of the gap needed, the type of material it should be made from, and the type of construction required.
Common materials used for double door thresholds include wood, metal, vinyl, and composite. The size of the gap can vary significantly depending on the size of the door and the amount of protection desired.
What is a mullion door?
A mullion door is an architectural element consisting of a framed section of glass or other materials used to divide a larger opening, such as a doorway or window, into smaller sections. Generally, mullion doors are found in commercial and industrial settings, although they can also be used to divide a room in a home or other residential setting.
Historically, mullion doors have been made of wood and metal, although modern designs can also incorporate other materials such as glass for a more contemporary look. Mullion doors can be inset or surface-mounted; surface-mounted doors often have moldings to provide an attractive finish.
Mullion doors are versatile, allowing for easy transition between rooms and spaces and improved airflow, making them popular in environments where controlling temperature is important, like restaurants and retail spaces.
Do French doors come in different widths?
Yes, French doors come in different widths. The standard width of a French door is 72 inches, which is 6 feet wide. However, some French doors may be as narrow as 48 inches and can be made up to 84 inches, which is 7 feet wide.
Some manufacturers even make custom sizes for French doors. The frame of the French door is made up of two doors, and each door is typically either 28 to 36 inches in width. When combined, the overall opening width of the French door is determined.
Generally, interior door frames are just 1-3/4 inches thick, which means that the two 36-inch doors fit into a space of 74-3/4 inches. May manufacturers also make double French doors, which measure up to 144 inches or 12 feet wide.
How are French doors measured?
French doors are typically measured by their width and height, both in inches. The width is determined by measuring the distance between the two door panels, not including the trim or casing. The height is then measured from the top of the door’s opening to the bottom of the threshold or sill.
If the doors open outward, the height measurement should be taken from the top of the opening to the exterior of the door at its bottom. If the doors open inward, the height measurement should be taken from the bottom of the opening to the interior of the door at its top.
Additionally, the panes of glass may be measured individually in terms of width and height (in inches), but the width of the entire finished door is typically what architects consider when designing a space.
What is the rough opening for a 60 inch French door?
The rough opening size for a 60 inch French door is typically 62 1/2 to 63 inches wide and 81 to 82 inches high. However, this can vary slightly depending on the manufacturer, so it’s important to double-check the measurements before framing in the door.
The frame of the door should be flush with the studs, so the rough opening should be at least 1 inch wider than the door plus the jamb, and 1 inch taller than the door plus the jamb. Additionally, the floor should be level to allow for proper installation of the threshold.
