Cabinet pulls, also known as handles, are one of the most important decorative features in any kitchen or vanity, adding visual interest and function to a space. Fortunately, installing them is relatively easy and can be done in a few simple steps.
The most important factor when it comes to installing cabinet pulls is where to put them. Typically, handles are placed vertically on cabinets, with two screws installed on either side. The top of the pull should be placed at a comfortable height; usually between 30 to 40 cm from the top of the cabinet.
Depending on the style and size of the pull, you may need to adjust this slightly.
Once you’ve determined where to position your handles, the next step is to measure the correct distance between the two screws. For standard-sized handles, the distance between each screw should be 6 cm.
If you are using pulls with different-sized bases or longer than the standard size, then you may need to adjust this measurement.
When it comes to drilling the holes for the screws, make sure that the drills you use are a few millimetres larger than the screws. This will make it easier to insert the screws and allow for a more secure attachment.
Finally, when it comes to installing the screws, use a screwdriver or an electric screwdriver for an easier time.
Once all the screws are in place, your cabinet pulls should be secure and ready to use.
Where do cabinet pulls go on Shaker cabinets?
In general, Shaker cabinets look best when cabinet pulls are placed in the center of each cabinet door and drawer. For doors, the pull should be centered vertically on the door. The majority of pulls are mounted on the face of the drawer, but depending on the size of the drawer, the pull may work best when mounted on the edge.
Make sure to evenly space the pulls across the cabinet faces and drawers. When installing the pulls, it’s important that they match the other hardware in the room. If they are a traditional style, choose pulls that are of a similar color to the other hardware in the kitchen, such as knobs and hinges.
If the style of the room is modern, look for sleek, simple cabinet pulls in a complementary color.
Where do you put the pulls on cabinet drawers?
Pulls should be placed on cabinet drawers in the center of the drawer front so they’re easy to reach and open. It’s important to make sure that the pull is not too low or too high as either of these placements can make opening the drawer more difficult.
Most drawer pulls are designed with two screws that mount in the center of the drawer. If there’s a thick face-frame on the cabinet, drill screws into the sides of the drawer for a more secure fit. Measure the width of the drawer, then divide it by two to get the center point.
Hold the pull in place and make sure it’s level before you mark the holes then drill the screws. Mounting pulls that require one screw can also be done in the center of the drawer.
What is the rule of thumb for cabinet hardware?
The rule of thumb for cabinet hardware is to select pieces that are proportional to the size of the door and drawers. Choosing pieces that are too small could make them look out of place, while pieces that are too large can overwhelm the design.
For example, if you have small doors, go with small knobs, handles, or pulls. Try to stay within a consistent style for the overall look. Small drawers call for small pieces that are proportional in size and shape to the pulls or knobs you choose for the larger drawers.
Also, make sure that the hardware matches, or at least coordinates, with the rest of the room’s design and the cabinet’s finish. Matching the hardware to the color of the cabinets helps the pieces blend in and look more cohesive.
Lastly, consider how you will use the piece. Consider if you want a traditional knob or handle, or for more intricate pieces.
Where do handles go on kitchen pantry?
Handles for a kitchen pantry can go either on the top, middle, or bottom of the pantry, depending on the type and style of your pantry. Most pantries have the ability to mount handles on the front or outer edges of the doors, allowing you to open and close the doors easily.
Alternately, many pull-out pantries and pocket doors have handles recessed into the center of the doors, allowing you to open and close them with a simple pull or push. Lastly, some other styles of pantries, such as tilt-out models, may require handles mounted on the top or bottom of the doors.
Ultimately, the type and style of handles you choose will depend on the type of pantry you have and the style of your kitchen. If in doubt, consult a professional and have them help you find the best handles for your pantry and kitchen.
How high should pantry handles be?
The height of pantry handles should be carefully considered when planning a new kitchen or renovating an existing space. Generally, standard pantry door handles should be around 40–45 inches from the floor to the center of the handle.
This is suitable for most average-sized adults; however, if the person utilizing the pantry is particularly tall or short, the handle should be adjusted accordingly. Additionally, if the pantry is particularly deep and reached with a step ladder, the handle should be set higher than 45 inches as to make it more easily accessible.
Above all, kitchen handles should be placed in a position that allows for smooth and easy access.
Can you mix pulls and knobs on cabinets?
Yes, you can mix pulls and knobs on cabinets. This can create an interesting design element, as well as allowing you to focus on the areas you need the most convenience. Pulls usually work best in larger areas of the cabinet and can offer an easy way to access fully loaded shelves, while knobs work better in smaller drawers and corner cabinets, where they allow you to get a grip on shelves that are more difficult to reach.
Hardware also gives you a great opportunity to customize the look of your cabinetry and add a unique touch to your space. Ultimately, it’s up to you on how you mix and match the two. Just remember to take measurements and calculate the spacing when deciding on placement.
What is the most popular hardware finish?
The most popular hardware finish is a classic stainless steel, but there is no single definitive answer to this question as it is a matter of personal preference. Generally, steel finish is a top choice because it is long lasting and corrosion-resistant, providing a sleek and modern look to any setting.
Oil-rubbed bronze is also highly popular for its timeless look that provides a warm, rustic feel. Many people also like brushed nickel for its timeless, traditional look. Polished nickel is also a classic choice with a more modern and luxurious feel.
There are other options like brass, copper, and aged iron, but these choices tend to have a more vintage vibe. Ultimately, the most popular hardware finish depends on a person’s unique style and personal preferences.
What hardware finish is most durable?
The most durable hardware finish depends on the environment and the individual needs of the application; many different finishes are available to protect different surfaces and materials in various applications.
Commonly seen finishes include stainless steel, oil-rubbed bronze, brass, and satin nickel. Stainless steel is the most corrosion resistant and is ideal for wet environments or outdoor applications, oil rubbed bronze is often used on exterior doors and locksets, brass is a classic finish but is softer and tends to tarnish faster, and satin nickel is popular for interior hardware and has a contemporary, understated look.
Powder coating is an Industrial finish that is very durable and great for exterior applications, and there are several more specialized finishes available for specific uses. Ultimately, the hardware finish that is best for a particular use will depend on the environment and the desired aesthetic.
Should I put pulls or knobs on kitchen cabinets?
When it comes to determining whether to put pulls or knobs on kitchen cabinets, there is no definitive answer. Both have their advantages and disadvantages, so it usually comes down to personal preference.
Pulls offer a more traditional look and are often recommended for larger drawers and cabinets. It is also easier to grab large drawer and cabinet doors with a pull than a knob. However, they also require more holes to be drilled into the cabinets, which can potentially weaken the cabinets if not done correctly.
Knobs are less intrusive than pulls and make cabinets look sleeker, which is common with modern kitchen styles. Knobs also require less effort when using the cabinet, especially if they are taller than standard pulls.
However, knobs may not provide a good grip should you need to open a larger drawer or cabinet, and if they are too small they may be difficult to grab.
Ultimately, the decision of whether to put pulls or knobs on kitchen cabinets will be up to your personal preference. Consider both advantages and disadvantages before making your decision, and if you are unsure, install both so you can determine which looks better and is more user friendly for you.
What hardware looks with white cabinets?
Hardware for white cabinets can range from modern and sleek to rustic and warm, depending on the look you’re going for. There are options for both knobs and pulls, but be mindful to use the same style across all of your cabinets for a cohesive look.
For a more modern look, chrome, brass, and stainless steel are all popular choices. For a warmer look, opt for materials such as brushed nickel, bronze, and copper. Some options for unique hardware to use with white cabinets include timeless finishes such as dipped copper, or add a pop of color with a painted piece.
There are also options to mix things up and combine different materials to really personalize your space. Choosing the right hardware for your white cabinets will go a long way in helping you create your dream kitchen.
Can you mix knobs and pulls in a kitchen?
Yes, you can mix knobs and pulls in a kitchen. Doing so can give your kitchen a unique and stylish look. When mixing knobs and pulls it is important to keep a few design principles in mind. You should make sure both hardware finishes complement each other and blend well with the surrounding cabinetry.
Avoid combining hardware that is too similar such as choosing two different sizes of the same shape. Instead, consider using shapes that contrast each other, such as using knobs in one style and round or oval pulls in another.
For a more subtle approach, be sure to select hardware in the same color family. When choosing which type of hardware to use for each cabinet and drawer, consider functionality. For example, pulls may be easier to grab on drawers with heavy contents.
Choose knobs for cabinet doors if you prefer a more traditional look. Additionally, mixing textures, such as smooth and hammered, can be an eye-catching design element.
How do you decide on pulls or knobs?
Deciding on whether you should use a knob or pull to open, close, or adjust something can be a difficult decision. Here are some factors that can help inform your decision:
1. Usefulness: If an item is used frequently and needs to be opened and closed quickly, a pull may be the most practical option. However, if the item needs to be adjusted in a precise way, such as a television volume, a knob may be best.
2. Aesthetics: Knobs tend to be small, so they can add a discreet, minimalistic look to any area. Pulls offer a classic, timeless look and can also include ornamental designs for a more ornate appearance.
3. Cost: Knobs tend to be much cheaper than pulls, so if you’re on a strict budget, knobs are your best bet.
4. Durability: Knobs are usually made from plastic or metal and are built to be durable, while pulls require more maintenance and could be prone to bending or breaking if not properly cared for.
Ultimately, it’s important to consider your needs and the look you’re going for when selecting pulls or knobs. Taking the time to think through your decision will ensure you make the right choice.
Does all the hardware in a kitchen have to match?
No, it does not have to all match in a kitchen, as long as all the hardware coordinates in some way. For example, choosing finishes of one hue allows all the different hardware to blend together in a unified look.
Additionally, mixing styles within one hue, like hammered and smooth finishes, allows for a unique and interesting look. And of course, if you want a traditional and timeless look, choosing hardware in the same color and style is always a safe bet.
Ultimately, it’s important to think not just about the look of hardware, but also the process of choosing it. Whether you’re looking for a uniform look or a customized and diverse look, it’s important to take your time to find pieces that fit your style and that you feel will bring out the best of the kitchen.
Do cabinet pulls need to be centered?
Cabinet pulls do not necessarily need to be centered on cabinet doors or drawers. Depending on the design or look you are going for, there are a few different options for where you can place your pulls on cabinets.
If you are looking for a more modern, streamlined look, then you could consider centering the pulls on the cabinet doors and drawers, as this gives a symmetrical, uniform look. On the other hand, if you are going for something more eclectic or unique, you can experiment and try different placements for the pulls, such as slightly off-center, in an asymmetrical pattern, or in an angled pattern.
Depending on the size and shape of your pulls, you can also opt for multiple pulls for larger drawers or use multiple lengths of pulls to get different looks.
Ultimately, where you decide to place your pulls is a personal preference, so don’t feel like you need to stick to centering them, if you don’t want to.
Where should hardware be placed on kitchen cabinets?
When installing hardware on kitchen cabinets, the placement will largely depend on functionality and style preferences. Generally, knobs and handles should be placed in the middle of the doors or drawers for easier accessibility.
If the knob’s length allows, it can be placed close to the edges to add a decorative look. In terms of traditional styles, knobs should be placed between 1 inch and 1 ½ inches from the corner of the drawer or door.
Pulls and handles should also be centered and placed horizontally, vertically, or diagonally. To ensure a uniform look around the kitchen, use the same style of hardware throughout the space. For any decorative items, such as hooks, they should be placed toward the middle of the cabinet doors.
This will keep them out of the way while still adding an attractive touch to the design. Ultimately, hardware placement should be based on personal preference and styling.