Skip to Content

Which Zinsser primer should I use?

The right Zinsser primer for your project depends on a variety of factors, including the type of surface you’re painting, the type of paint you’re using, and the climate where you live. Zinsser offers a variety of primers to fit different needs, from oil-based primers ideal for exterior or metal surfaces to water-based primers for wood, drywall, and other interior surfaces.

One of the most popular Zinsser primers is thick, fast-drying B-I-N, a white pigmented shellac primer that seals porous surfaces and dries tack-free in just 30 minutes. It’s perfect for blocking water and smoke stains, wood knots, and other issues that can mess with a new coat of paint.

If you’re looking for an interior primer for walls and ceilings, Bulls Eye 123, a water-based primer, can be a great choice. It’s tough enough to tackle tough stains and odors, and it won’t raise the grain in your wood surfaces.

Finally, if you’re looking for a sealant and an undercoat, consider Rust-Oleum’s Zinsser AllCoat Exterior primer. It’s a durable, flexible elastomeric waterproofing product that can protect and extend the life of your paint job.

Ultimately, the best way to determine the right primer for your project is to read online reviews, contact the manufacturer directly, and talk to your local hardware store for advice.

What’s the difference between Zinsser BIN and Zinsser 123?

Zinsser BIN is a shellac-based stain-blocking primer, sealer, and finish. It is designed to seal porous surfaces, block out strong odors, and prevent tannin bleed from wood and cedar. Zinsser BIN is great for sealing fire, smoke, and water damage, and can even block old nicotine stains.

It is also effective against bleed-through from knots and sap streaks in wood.

Zinsser 123 is an interior and exterior water-based primer, sealer, and stainkiller. It is designed to bond to glossy surfaces, block bold colors, and adhere to difficult interior and exterior surfaces like PVC and vinyl.

Zinsser 123 has superior adhesion and adheres to surfaces with little or no sanding, and helps retain gloss. It is great for covering existing rust, clean, sand and paint galvanized and aluminum surfaces, and is excellent for use with low VOC and low odor requirements.

Is Zinsser 123 a good bonding primer?

Yes, Zinsser 123 is a good bonding primer. It is a water-based high performance adhesive primer which bonds to virtually any substrate and seals porous surfaces. It can be used on drywall, wood, glass, concrete, galvanized metal, glossy surfaces, and more.

It also creates an ultra-smooth surface for painting over, reduces the amount of coats needed for paint, as well as provides protection against mildew and peeling. Plus, it will not raise the grain of the underlying material.

Some of its top features include fast drying, low odor, low VOC, and it is easy to apply. All of these features make Zinsser 123 a great bonding primer for many projects.

Do you have to paint over bullseye 123 primer?

No, you do not have to paint over BullsEye 123 Primer. BullsEye 123 Primer is a water-based, low-odor primer and sealer that is ideal for interior and exterior use. It seals unfinished surfaces, hides prior colors and covers porous substrates.

It can even be used to prime existing glossy surfaces! This makes the BullsEye 123 Primer an ideal primer for any painting project, as it eliminates the need to sand and degloss existing surfaces. It dries to a clean, white matte finish that can be top-coated with any latex paint.

Additionally, service temperatures of up to 200°F make BullsEye 123 Primer perfect for dry or damp surfaces. Furthermore, its enhanced alkali resistance protects against problems associated with new masonry and concrete.

So, the BullsEye 123 Primer does not need to painted over because it is so versatile and durable on its own.

What type of primer is Zinsser 123?

Zinsser 123 is an interior/exterior water-based, low odor, high hiding primer. It is a great choice for both professional and amateur DIYers who are looking for a fast drying and long lasting primer.

This formula features a powerful mildewcide and fungicide that helps protect against mildew staining, and its tough, rust inhibiting formula guards against future rust. Zinsser 123 bonds to glossy surfaces and can be used on a variety of different surfaces including wood, masonry, drywall, and aluminum.

It has excellent adhesion and can be used under any type of paint. This primer is fast drying and is dry to the touch in just 1 hour. It also has extremely low odor which makes it great for projects done in confined spaces.

Overall, Zinsser 123 is a great choice for an interior/exterior water-based, low odor, high hiding primer.

What is better Kilz or Zinsser?

The answer to this question depends heavily on the needs of each individual project. Both Kilz and Zinsser offer a variety of different products, and each product may work best in certain situations.

Kilz is usually the go-to value primer for most projects. This is due to the fact that it is typically cheaper than comparable products and offers a wide variety of options. For instance, Kilz offers an oil-based primer, an acrylic primer, and a shellac-based primer.

Depending on the surface, Kilz may be the best choice.

On the other hand, Zinsser is more expensive, but it is typically preferred for heavy-duty stain blocking. They offer a line of primers that are specifically formulated to block out tough stains, such as smoke and water damage.

This makes them a great choice for projects where you need to make sure the stains won’t come back. They also offer a line of primers specifically designed for metal surfaces, which makes Zinsser a great choice for metal surfaces.

In terms of coverage, both Kilz and Zinsser offer a variety of options in terms of both coverage and sheen. Both primers will offer great coverage, but Kilz typically has a slightly better coverage rate.

In terms of sheen, Zinsser offers a wide selection of options, ranging from flat to semi-gloss.

In conclusion, the best choice of primer comes down to personal preference and the needs of each individual project. For the average DIYer, Kilz is usually the best choice due to its lower cost and wide variety of options.

However, for projects that require heavy-duty stain blocking, or projects involving metal surfaces, Zinsser is usually the better option.

Can I use Zinsser 123 as an undercoat?

Yes, you can use Zinsser 123 as an undercoat. Zinsser 123 is a high-performance primer sealer that is ideal for preparing interior bare or painted walls and ceilings. It is specially designed to provide an even, efficient finish on both porous and non-porous substrates, and it can be applied directly over existing paints, glossy surfaces, wallcoverings and plaster.

The fast-drying formula provides excellent adhesion and offers superior hiding, preventing bleeding and ‘staining’. As an added benefit, it offers mildew-resistant properties making it perfect for use in high-humidity areas.

Zinsser 123 can be applied with a brush, roller or spray, and it can be top-coated with alkyd, oil-based enamels, urethane-modified alkyds, acrylics and most other decorative coatings.

Does Zinsser 123 cover rust?

Yes, Zinsser 123 does provide excellent protection against rust. It is a unique primer/sealer which offers outstanding adhesion to glossy surfaces, including galvanized metal, which is often prone to rust.

The coating forms an excellent barrier between the surface and the elements that can cause corrosion and rust. It also creates an extra layer of protection which helps to extend the life of the surface.

Additionally, it features a mold and mildew-resistant finish which helps to prevent the growth of these unwanted organisms, further reducing the risk of rust.

Which Zinsser is the best?

When it comes to selecting the best Zinsser paint product, it can be a difficult decision as there are many great options to choose from. To determine which Zinsser is best for your project, it is important to consider both the intended use of the coating and your own preferences.

For interior wall painting, Zinsser’s Perma-White Interior is a popular choice. It forms a hard, scrubbable finish that resists fading and has superior adhesion for use in high-humidity areas and over glossy surfaces.

For exteriors, Zinsser’s 1-2-3 Plus Exterior Paint offers a mildew-resistant coating that is easy to apply and is specially formulated to resist fading and chalking, making it a great choice for outdoors.

If your project involves priming and painting metal, Zinsser’s Rust Reformer bonds and turns a pitted, rusted surface into a paintable surface.

Zinsser also offers a few options for specialty paints. For fast-drying, odorless finishes, the B-I-N® Advanced Synthetic Shellac Primer is a great option. For a mildew-resistant paint specifically designed for bathrooms, there is the Perma-White Mold and Mildew-Proof™ Interior Paint.

And finally, Zinsser’s AURA® Waterborne Eggshell Paint is a premium quality waterborne paint that offers extraordinary coverage, durability and washability.

Ultimately, which Zinsser product is the best for your project will depend on what you are looking for and the specific requirements of your project. However, regardless of the paint product you select, you can rest assured that all Zinsser products are of the highest quality and will provide you with exceptional results.

What is Zinsser BIN used for?

Zinsser BIN is a heavy-duty primer-sealer used to provide a versatile, strong bond between several different surfaces, such as masonry, brick, plaster, drywall, wood, and metal. It is also suitable for previously painted surfaces, and will seal and bind them together, providing a tough, uniform protective shell.

It is an excellent sealer, providing superior adhesion to glossy or chalky surfaces, blocking mildew and stains, and covering up odors and smoke damage. It also has good penetration, adhesion, and flexibility, making it ideal for priming rough surfaces.

It also seals porous surfaces, eliminating the need to apply several primer coats. Finally, it is fast drying, and dries to a smooth, non-sticky finish. Zinsser BIN is an ideal solution for priming and sealing a variety of surfaces, helping to prepare them for further application of coatings such as paint and enamels.

Is one coat of Zinsser BIN enough?

The answer to this question depends on the surface you are working on and the type of finish you would like to achieve. Generally speaking, a single coat of Zinsser BIN is enough for surfaces that have been properly prepared, and it can be used as both a primer and a topcoat.

However, for surfaces with minor imperfections or for a more durable, longer-lasting finish, two coats of Zinsser BIN may be recommended. To ensure a professional-looking and long-lasting result, it’s important to always read and follow the product labeling and instructions for use.

Should I sand between coats of Zinsser BIN?

Yes, it is necessary to sand between coats of Zinsser BIN when painting. This extra step ensures a smooth, even finish that is not possible without sanding. When sanding, use a fine grit sandpaper to lightly abrade the surface of the wood or other surface.

Do not press too hard against the surface as this could damage the wood or other surface. After sanding, vacuum up any dust that has gathered and wipe the surface down with a damp cloth to remove any remaining dust particles.

Sanding ensures that there will be no rough patches or splotches when the paint dries, giving you an even, professional finish.

Do you need to sand before bin primer?

Generally speaking, it is not required to sand before applying a bin primer. However, if the surface you are covering has any dust, dirt, or other particles, it’s always a good idea to sand before applying a bin primer.

This ensures that the bin primer can adhere properly and gives you a smooth finish. If the surface is particularly rough, then light sanding before applying primer can also help to fill in the uneven areas, creating a smoother and better-looking finished result.

In general, you may want to sand if you have a lot of dust, dirt or other particles on the surface, if the surface is particularly rough, or if you plan on applying multiple coats of bin primer for better coverage.

Do you need undercoat on top of Zinsser BIN?

The short answer is that it is not necessary to use undercoat on top of Zinsser BIN. Zinsser BIN is a shellac-based primer and sealer that, when fully cured, can provide superior adhesion, sealing and stain blocking properties.

In most cases, if Zinsser BIN is applied according to the manufacturer’s instructions, then an undercoat will be unnecessary. It should be noted, however, that Zinsser BIN can be used as an undercoat itself and many people find that this is a convenient and cost effective way of preparing an otherwise difficult surface for painting with a topcoat.

One final point to note is that if any blocking primers or sealers were used prior to the application of BIN, then an undercoat may be necessary as BIN alone may not fully seal the surface.

Can I apply Zinsser shellac with a foam roller?

Yes, it is possible to apply Zinsser Shellac with a foam roller. This process requires some preparation, as Shellac does not mix well with water and needs to be diluted with an oil-based thinner for rolling.

Once you have the proper mixture, use a foam roller to apply the solution in a thin, even coat. It may be necessary to use a brush in some areas to get a smooth finish. Make sure to allow the Shellac to dry fully before applying a second coat.

Additionally, you should wear protective gear when working with Shellac since some of the chemicals in the product are harmful.

How long after Zinsser primer can I paint?

After you apply the Zinsser primer, it typically needs to cure for 1-2 hours before you can begin painting. It’s important to read all the instructions on your particular product and allow for full drying time before painting.

If the primer is not completely dry, the paint won’t adhere properly and your finished job won’t look its best. After the primer is dry and any necessary sanding is done, you should be able to paint over it.

Additionally, if you choose to wait longer than the recommended curing time before applying the paint, make sure you lightly sand the surface again before doing so to ensure a good finish.

Can I paint over Zinsser BIN?

Yes, you can paint over Zinsser BIN. It is an interior and exterior primer sealer that provides excellent adhesion to glossy surfaces, even lacquers, and also makes an excellent base coat over existing oil or alkyd paints.

It is rated for high sealing performance, strong adhesion and great flexibility. The primer is highly effective in sealing water and rust stains, as well as block tannin and bleed-through from knots and sap streaks.

Applying paint over the primer is easy and produces excellent results. Paint sticks well to the primer, which keeps your paint job lasting longer and looking better. If the areas you are painting are at risk of moisture damage, the primer can help protect the paint by preventing moisture from seeping through.