Skip to Content

Who makes Craftsman weed eater?

The Craftsman brand of outdoor equipment is owned and manufactured by the global power equipment company, CRAFTSMAN International. Established in 1927 in the United States, that includes the Craftsman brand of chainsaws, string trimmers, leaf blowers, and other pieces of outdoor power equipment.

The Craftsman brand is now found in over 500 stores across the United States, Canada, and Mexico. Craftsman has been around for almost 90 years and is now one of the most recognizable brands in the outdoor power equipment market.

Craftsman weed eaters are designed to be efficient, reliable, and durable. They feature a variety of adjustable settings and attachments that make tackling any job easy and efficient. Craftsman weed eaters come with a 2-year warranty, ensuring a dependable product for a long period of time.

How does a 2 cycle Weed Eater engine work?

A two cycle Weed Eater engine works with a two stroke combustion cycle. This involves a piston moving up and down within a cylinder to create a combustible mix of fuel and air, that is then ignited to generate power.

The piston compresses the air/fuel mix and a spark plug ignites it, causing an expansion that pushes the piston back down as it generates a power output. The exhaust then exits through an exhaust port.

The first part of the two stroke cycle is the intake stroke. This is when the piston moves down the cylinder in the engine, creating a vacuum that draws in a mixture of air and fuel. This air/fuel mix flows through an intake port and into the cylinder.

The carburetor helps to mix fuel with air in the proper proportions.

The second part of the two stroke cycle is the compression stroke. When the piston moves up the cylinder, it compresses the air/fuel mix, increasing its temperature and pressure. A spark plug then ignites the air/fuel mix, which causes the air/fuel mix to expand and drive the piston down the cylinder.

The third part of the two stroke cycle is the power stroke. This is when the air-fuel mix that the piston expels pushes the piston back down the cylinder, generating the power output.

The last part of the two stroke cycle is the exhaust stroke. Rather than pushing the piston down the cylinder, the exhaust valve is opened and the exhaust gases are exhausted out of the cylinder, into the exhaust port at the end of the engine.

Then the cycle begins again.

What is the easiest weed wacker to use?

The easiest weed wacker to use depends on the type of lawn you have, its size, and the power you need. For small yards with light vegetation, a battery-operated lightweight electric trimmer may be suitable.

These are generally easier to maneuver and require minimal maintenance. For larger properties or yards with thick vegetation, a gas model may be your best option. These are usually more powerful and can handle tougher jobs; however, they require more maintenance and fueling.

Before choosing a weed wacker, consider which model fits your lawn size, vegetation and maintenance preferences best.

How do you change the string on a craftsman weed wacker?

Replacing the string in a craftsman weed wacker typically requires a few steps. Before starting, ensure the weed wacker is both unplugged and disengaged before beginning.

First, begin by removing the cover as designated by either the user’s manual or the manufacturer’s website. Depending on the model, you may need to loosen several screws.

Once the cover is removed, locate the spool and remove both the empty spool and the hub. Make sure to pay particular attention to the direction of the arrows indicating which way the string should unravel during the installation process.

Now, you’ll need to cut the string from the replacement spool to the desired length using a pair of scissors or a cutting tool. Always make sure to double the amount of string you think you will need and loop the end of the string around its center as instructed.

Next, you’ll want to grab the hub and reinsert it onto the craftsman weed wacker, making sure that the arrow is pointed in the direction in which the string will unspool. Once the hub is placed in, carefully lay the string out in a straight line and place the loaded spool onto the hub, making sure that the string is still wound securely under the holes of the spool.

Finally, you can reattach the cover and screws to securely place the weed wacker back together. Ensure the string is not tangled before using the weed wacker. With proper care, your weed wacker and its spool should easily last several seasons.

Can I use any size weed eater line?

No, you cannot use any size weed eater line. Different types of weed eaters typically require a particular size of line for optimal performance. Generally, the amount of line needed for each unit is stated in the product’s manual, or product details on the box.

The size of line may be expressed using both the diameter, measured in inches or millimeters, and strength, which is measured by its pound-test rating.

Weed eaters typically require a variation of 0.065- or 0.080-inch diameter line that is rated between 8 and 20 pound test. When using a lightweight line, such as those 0.065-inch diameter lines with an 8 to 17 pound test, it is important to avoid getting the line caught on hard or heavy materials.

For tougher weeds and heavier vegetation, a line in the 0.080-inch diameter with a 16 to 20 pound test rating is recommended. Additionally, specialty lines, such as twisted or serrated, are available for use in certain types of applications.

It is best to check the manual for specific details on the type of line to use for the unit.

What size trimmer line should I use?

When selecting the size trimmer line to use, it’s important to consider the type of terrain you’ll be cutting and type of weeds you’ll be trimming. The size of trimmer line ranges from. 080″ to. 155”.

For most residential yards with grass and light vegetation, a. 080 to. 095 inch line should be sufficient. If your yard is filled with thicker weeds and small bushes, you may find a. 095 to. 105 line to be more appropriate.

If you’re looking for heavy-duty performance, go for a. 130 to. 155 size line. Remember, the thicker the trimmer line, the more aggressive the cut, but it will also be more difficult to maintain. If you’re cutting grass with a mower and want to just touch-up the edges with a trimmer, a smaller line size of.080 to.

095 should be more than adequate. If a line isn’t feeding properly into the head, it’s likely too thick for the machine. Whichever size you buy, make sure that it fits the diameter of your trimmer head.

Check the manufacturer’s instructions for what line size is recommended in order to get the most out of your trimmer.

How long should a weed eater string be?

The length of a weed eater string depends on the size of the head, the type of material, and the type of weeds you’re cutting. Typically, most single-line trimmer heads use anywhere from. 065” to. 105” diameter line. A.

065” diameter string is usually about 40 feet long, while the higher diameter strings can range from 30-60 feet in length. It’s important to note that the larger the diameter, the less line you will need overall.

Different types of grasses and weeds require different materials as well. You can use either nylon or a hybrid line. Nylon is stronger and more durable than a hybrid line, which is usually made of plastic and synthetics.

The length will also depend on the type of material used.

To ensure optimal performance, always follow the manufacturer’s instructions for how long the line should be. If the head isn’t specified, it is best practice to replace the line with the same length and diameter string as the original.

Does soaking trimmer line help?

Soaking trimmer line in a lubricant or oil can help make it last longer and cut more effectively. When the trimmer line is exposed to moist conditions, it tends to fray, weaken, and struggle to cut. By soaking it in a lubricant, you are providing it with a protective coating that makes it more resistant to wear and tear.

This helps it cut more efficiently and increases the lifespan of the line. Also, the lubricant helps reduce vibration and friction to the trimmer head, allowing it to run smoother and more efficiently, which can further extend the life of the trimmer line.

Some of the best oils to use when soaking trimmer line include vegetable oil or light weight motor oil.

How much string do you put in a weed eater?

The amount of string you need in a weed eater depends on the size of the trimmer head, how dense the weeds are, and the type of string used. If you’re using a standard size trimmer head with 0.065-inch line, you’ll want to install between 25 and 75 feet.

If the trimmer head is larger, it will require more string to fill the spool. Weeds that are thicker or denser may need a longer length of string due to the amount of wear and tear caused by the tougher material.

Additionally, different types of string have their own specific lengths that should be used. It’s always recommended to check the manual to get the exact information on the specific string type and size for your particular weed eater.

Why does the line on my grass trimmer keep breaking?

First, it may be a problem with the trimmer itself, such as a worn-out or damaged spool or line. If the line has run through it too many times, it can create a weak spot where it will snap easily. Additionally, the line may be too thick, causing it to bind and break under the pressure of passing through the trimmer’s head.

Other causes of line breakage may include the line being placed incorrectly in the spool, such as when it is overly stretched or bunched up in the spool. If the line is already too brittle, it will have difficulty withstanding the pressure created when trimming around trees, fences and sidewalks.

Finally, operator error can periodically lead to broken lines from cutting too hard or having the trimmer held at an incorrect angle.

How long do you soak trimmer line in water?

Trimmer line should typically be soaked in water for 15-30 minutes. This allows the trimmer line to soften up, making it more flexible and easier to work with. Depending on the type of trimmer line and the environment you’re working in, you may need to soak the trimmer line for longer than 30 minutes.

If you’re using a more flexible type of trimmer line, like a low-stretch or hybrid line, you may even want to soak it for up to an hour. Similarly, if you’re working in a very hot or humid environment, soaking the line for a longer amount of time may help ensure it retains flexibility.

Once the trimmer line has soaked for the appropriate amount of time, be sure to shake off any excess water before installing the line onto your trimmer.

Who manufactures Troy-Bilt string trimmers?

Troy-Bilt string trimmers are manufactured by MTD Products, Inc. , a global leader in outdoor power equipment with decades of experience and a proud history of innovation. The company’s products are designed to fit the needs of outdoor living, manufacturing and distributing outdoor power equipment and accessories for a wide range of applications.

MTD began in 1932 and currently produces ride-on mowers, garden tractors, walk-behind lawn mowers, and other outdoor power equipment under several different brands, including Troy-Bilt. Troy-Bilt string trimmers are designed to tackle the toughest trimming jobs with comfort and ease, featuring quality pro-grade engines, easy-to-use controls, adjustable handles and either straight or curved shafts.

Troy-Bilt string trimmers provide excellent power, performance and reliability when you need it most.

Where are Stihl string trimmers made?

Stihl string trimmers are engineered, manufactured, and sold by Stihl, Incorporated, in Virginia Beach, Virginia. The line of products has been sold worldwide since 1926 and continues to be produced in the United States.

In addition, many of the components that are used on Stihl string trimmers are also sourced from locations throughout the United States and the rest of the world. All of the products are then assembled in Virginia Beach, Virginia, in the manufacturing facility there.

The components for the string trimmers are also sourced from a variety of other countries in order to ensure the highest-quality of their products. This allows for Stihl to offer their customers some of the most reliable and efficient yard-care products available on the market.

Where are Badger weed eaters made?

Badger weed eaters are made by the American Lawn Mower Company (ALM) located in Shelbyville, Indiana. ALM has been family-owned since 1895 and is the largest reel mower manufacturer in the United States.

Badger weed eaters are made from lightweight, strong aluminum and steel that provide durability and performance that consumers have come to trust. They feature engine-powered motors for efficient cutting in all types of yard conditions.

Badger weed eaters are designed to handle tough weeds, grasses, and other tough vegetation with ease. They also come with accessories like blade and line heads, trimmer heads, and more to tackle all your outdoor tasks.

Where are Husqvarna brush cutters made?

Husqvarna is a Swedish company, with all its products being manufactured within the country. Their brush cutters are produced in many of their facilities located throughout the country, with their main manufacturing sites located in Huskvarna, Gimo, Jonsered and Tornio, Sweden.

They also have regional manufacturing centers and distribution centers in Germany, France, Italy, USA, and Brazil. For example, their brush cutter range is produced in Gimo, Sweden and the distribution and sales offices in Europe and the USA are located in Sweden and Germany, respectively.

Husqvarna pride themselves in consistently providing top of the line quality and design – using only the latest technology and production methods in their factories.

What is the rated brush cutter?

A rated brush cutter is an outdoor power tool that is used to cut through thicker foliage and vegetation. It is designed to efficiently and easily mow down tall grasses, small saplings, and even brush that is backed up by a hard surface such as a pavement or deck.

Brush cutters usually include a powerful motor and metal blade that is either mounted on the unit or connected through a drive shaft. In addition to their traditional uses, these tools can also be used to cut down or remove small trees or stumps.

Brush cutters can act as an incredibly versatile tool, helping with the bigger jobs that standard mowers cannot achieve. When buying a brush cutter, it is important to keep in mind the amount of power the tool has and the size of the area it will be used in.

Choosing a brush cutter with the proper specs for the job in hand can help ensure that it is effective and safe for operation.

Who owns Weed Eater brand?

The Weed Eater brand is owned by MTD Products Inc. , a manufacturer of outdoor power equipment who also carries the Troy-Bilt, Bolens and Yard Machines brands. MTD was founded in Cleveland, Ohio in 1932 and has since grown to its current state, with nearly 10,000 employees and 11 manufacturing plants around the world.

As one of the largest power equipment manufacturers in North America, MTD provides quality, value-priced solutions to gardeners, landscapers, and homeowners who demand power and performance. With nearly 80 years of innovation and experience, MTD provides a wide range of cutting-edge products such as weed eaters, lawn mowers, tractors, and snow blowers that are among the most durable and dependable in the industry.