There can be several reasons why your staple gun stopped working. It’s important to first determine what type of staple gun you have – Depending on if it’s an electric or manual model may determine the issue and how to fix it.
For manual light duty or heavy-duty staple guns, some common reasons for the staple gun not firing may include:
• The handle has not been compressed fully to raise the nose of the gun.
• The staple magazine can’t reach the rear arm, causing a jam.
• The spring-loaded arms are stuck open.
• The gun is loaded with the wrong size of staples.
• The staple magazine is stuck in the gun and not feeding the staples.
In an electric stapler, some of the common causes of failure are:
• Low power supply or electrical failure.
• The stapler is jammed with staples.
• The magazine switch is stuck or broke.
• The driver doesn’t release.
If you are unable to determine the cause or are unable to fix it yourself, it is a good idea to take the staple gun to a repair shop. A professional can diagnose and fix the issue with your staple gun so it can get working again.
How do I fix my stapler not working?
If your stapler isn’t working, there are a few possible issues that might be preventing it from working properly. First, check to make sure you have the correct staple for your stapler, as different staplers require different sizes and types of staples.
Once you’ve confirmed that the staples you using are compatible with your stapler, verify that you’re loading the staples correctly. Many staplers utilize a magazine design, where you slide the magazine out, load in a stack of staples, and then slide it back in.
If you’re having trouble with your magazine not loading correctly, try lightly tapping on the side of the magazine as you reinsert it.
Another possible issue is that the stapler may have a jam. If your stapler isn’t working, you may need to take it apart and clear the jam before you can use it again. Be sure to only use a tool like a screwdriver to do this, as manual staplers are very finicky and can be easily damaged.
If you’re having trouble clearing the jam, try to consult the owner’s manual for your stapler, as they will often provide detailed instructions on how to solve common issues.
Finally, if your stapler still isn’t working, it’s possible that it has malfunctioned and needs to be replaced. Depending on your stapler’s warranty, it may be possible to get it replaced at no cost.
To find out more, contact the manufacturer and they can help you find the best solution.
How do you Unjam an electric stapler?
If you experience an electric stapler jam, first make sure the stapler is powered off. Then, remove any fasteners from the stapler, and check for any jammed documents or staple pieces that could be preventing it from working properly.
Some staplers can be placed in ‘reverse’ mode to help remove a jam, while some include a jam release lever on the side that you can use to manually push the staples out of the way. If those both don’t work, dismantle the stapler to get a better view of the mechanism.
Keep in mind that when dismantling the stapler, small parts (such as staples) may spring out, so use caution when doing this. Once you can get a good look, you can use tweezers or a needle nose pliers to remove any visible bent or jammed staples.
After that, you may need to loosen the stapler assembly from the mounting plate to finish clearing out any jammed pieces. Once everything is removed and reassembled, test the stapler to see if it is jam-free and operational.
Can you use standard staples in a Bostitch electric stapler?
Yes, you can use standard staples in a Bostitch electric stapler. Electric staplers are designed to be compatible with all different sizes of standard staples, and Bostitch is no exception. The Bostitch® electric stapler can accommodate all different sizes of standard staples, such as Bostitch B8 and Bostitch SB35 standard staples.
Additionally, you can use a range of sizes in standard staple formats, such as full-strip, 1/4-inch, 3/8-inch, and 1/2-inch. With a Bostitch electric stapler, you’ll also be able to easily adjust the depth setting to accommodate various staple sizes.
Keep in mind that when using a larger size of staples, you may need to adjust the settings for the size of the staple you are inserting.
Do all staplers use the same staples?
No, not all staplers use the same staples. Stapler sizes and types can indicate which type of staple is needed. For example, a full-strip stapler may require 24/6 or 26/6 staples, while a half-strip stapler may require a 26/10 or 24/8 size staple.
Additionally, certain specialty staplers may require a different type of staple, such as an upholstery staple. For this reason, it’s important to review the stapler packaging to determine the correct size and type of staple that is needed.
How do I know what staples to buy for my staple gun?
When purchasing staples for your staple gun, it is important to consider the size of your staple gun and what materials you plan to use it on. When selecting a staple, you should choose staples that will fit inside the nose (or the rivet) of the gun.
Most staple guns are designed to accept either a ¼” or 3/8” staple, but this can vary depending on the size and model of your staple gun. Once you have established the size of your staple, you should find out which material it will be used on.
Standard staples are made out of either galvanized steel, stainless steel, amt, or other titanium alloy materials. Each material type is best suited for certain applications and substrate materials, so be sure to consult the manual or a product specialist for guidance on which material will work best for your particular project.
Additionally, you may need to venture into specialty fasteners such as “staples feet” or “staple pins” which are also available in a variety of metals and sizes. Lastly, check to see if your staple gun has any other specific feature such as an anti-jam function or if it requires specialized staples.
Armed with this information, you will be able to select the right staple for your staple gun and the appropriate application.
What size staples does a Craftsman electric staple gun use?
The Craftsman electric staple gun uses standard 1/4 inch staples. This staple size can be found at many hardware stores, and is compatible with a wide range of electric staple guns. The staple size also works with most lightweight materials like fabric, paper, and plastic.
Depending on the type of material, 6mm staples may also be used.
Can I use a regular staple gun for upholstery?
No, you should not use a regular staple gun for upholstery. Upholstery requires specialty staples that are larger in gauge and size than regular staples. Regular staples are not durable enough to stand up to the additional tension and force when using a staple gun on fabric.
Upholstery staple guns are engineered to drive the larger stapes more powerfully into the fabric material. In addition, regular staple guns can cause damage to the upholstery if the staple does not form a secure bond.
The upholstery staple gun is designed to help prevent this damage occurring.
Are staple guns universal?
No, not all staple guns are universal. Different types of staple guns are made for different applications and types of staples, so it’s important to find the right type for your project. Standard staple guns are used for basic fastening tasks such as attaching insulation, carpet padding, and upholstery.
Heavy-duty staple guns are designed for more challenging tasks like securing carpets, roofing felt, and paper. Electric staple guns are best suited for fastening fabric, masonry, plastic sheeting, and insulating foam board.
Pneumatic staple guns are great for upholstery, trim work, cabinetry, and furniture production. Finally, specialty staple guns are designed for specific uses such as aircraft assembly, furniture making, and packaging.
What are the different types of staples?
Including both temporary and permanent staples. Temporary staples are typically made from plastic or metals, and are intended to be easily removed. Common examples of temporary staples include office staples, carpet staples, and tacking staples.
Permanent staples are typically made from more durable materials, such as metal, and are designed to hold heavy materials together securely. Common examples of permanent staples include: book binding staples, upholstery staples, masonry staples, and connector staples.
Both types of staples can be purchased as staples of varying sizes and shapes. Oversized staples, thin wire staples, and assorted sized staples are all commonly used in a variety of tasks.
