Skip to Content

Why did they stop making strike anywhere matches?

Strike anywhere matches used to be popularly found in stores because of their convenience and practicality, however, due to the fact that they burn hotter and longer and the risk of a greater injury, manufacturers stopped making strike anywhere matches.

The primary concern with strike anywhere matches is the increased risk of fire. Because strike anywhere matches burn longer, it can be more difficult to extinguish the flame, leading to a greater risk of it becoming out of control and causing injury or property damage.

With the invention and increased accessibility of lighters, having a match that can be struck anywhere is no longer seen as a necessity.

Additionally, the chemicals used to make strike anywhere matches, including phosphorus and sulfur, are often considered highly toxic. Therefore, further raising the potential danger posed by them.

For the above reasons, strike anywhere matches have been phased out and replaced with safety matches, which only burn when they’re struck against the side of the box and are much less likely to cause injury.

How do you make waterproof strike anywhere matches?

Making waterproof strike anywhere matches requires a thorough approach and attention to detail. First, you will need the supplies to make your own matches: strike anywhere match heads, wooden matchsticks, sandpaper, super glue or a Fevicryl glue, a metal container or metal strip, a small bowl, and a sealant such as clear nail polish or waterproof sealant.

To start, you will need to sand down the head of each matchstick to remove the top coating. Next, take the metal container or metal strip and fill it with some of the match heads. Put the empty bowl nearby, to catch the lit match.

After that, make sure to seal the container with the sealant, followed by one layer of super glue around the match heads to bond them together and make them waterproof.

When finished, you should have a container that can create waterproof strike anywhere matches. Place the metal container or strip within reach and strike against the container when you want to light your match.

Have a bowl or some way to capture the lit match nearby, to ensure a safe disposal. Once the match is out, simply relight the match head by striking it again against the container. With this method, you can create waterproof strike anywhere matches quickly and easily.

What is the difference between safety matches and strike anywhere matches?

Safety matches are a type of match specifically designed to ignite only when they come into contact with special striking surfaces. The head of a safety match contains a segregated mixture of chemicals which when brought into contact with the striking surface, ignite and form a flame to light the remainder of the match.

The special striking surfaces are typically located on the box containing the safety matches.

Strike anywhere matches are a type of match that will ignite when struck against any rough surface. The head of a strike anywhere match contains a chemical mixture which, when struck against a rough surface such as the sole of a shoe, will ignite and form a flame to light the remainder of the match.

These matches are much more volatile than safety matches, and as such, must be used with great caution.

What surfaces do strike anywhere matches work?

Strike anywhere matches work on just about any surface. It doesn’t matter if the surface is rough or smooth, wet or dry, because strike anywhere matches are made with special phosphorus-sulfur tips, which will easily ignite with any form of friction.

For example, these matches can be ignited on a brick wall or a piece of wood, as well as scratched against a special strike-anywhere surface to ignite the match. If there are any doubts, it is best to test the matches on an inconspicuous area to make sure they have the desired effect.

Are waterproof matches worth it?

Yes, waterproof matches are definitely worth it if you are exposed to inclement weather conditions regularly or planning to go camping, hiking, fishing, or boating. They are designed to resist water, moisture, and strong winds, giving you a reliable way to light a fire or make a campfire when the conditions are less than ideal.

Waterproof matches are specifically designed with wax or chemical-sealed stick matches, specific chemical mixtures are used to make them waterproof and windproof. This includes chemical treatments that cause a “self-igniting” or “hot-strike” effect allowing them to light even after being submerged in water for several minutes or getting soaked in rain.

Furthermore, waterproof matches come with a case or box made of strong and waterproof material. This allows you to easily store them and keep them dry, ensuring that they will perform as expected when you need them.

In conclusion, waterproof matches are an essential part of any adventurer’s toolkit and can be a lifesaver if you’re caught in bad weather conditions or need to make a fire. It’s definitely worth it to invest in a quality product that is designed to perform in wet and windy conditions.

Do strike anywhere matches contain phosphorus?

Yes, strike anywhere matches contain phosphorus. Specifically, strike anywhere matches have a small amount of elemental or white phosphorus on their striking surface, usually on the side of the box. This phosphorus reacts with the friction of striking the match against a rough surface, such as sandpaper, to generate enough heat to ignite the combustible material on the match head.

The phosphorus used in strike anywhere matches is typically much less than is found in strike-on-box matches that contain a non-flammable, red phosphorus striking surface. Despite their convenience, the use of strike anywhere matches is not recommended due to potential safety hazards.

Not only do they contain an easily combustible material, but white phosphorus is highly toxic and can cause serious health risks if inhaled, ingested, or absorbed through the skin.

How do you light a safety match without the box?

The easiest way to light a safety match without the box is to use another flame source such as a candle, lighter, or another match. Start by holding the matchstick with one hand and the flame source with the other.

Then, put the tip of the matchstick into the flame for about three seconds until you start to see sparks. When you see sparks, quickly remove the matchstick from the flame and blow out gently. The match should light and you’ll be able to start a fire or light whatever you need.

What are match strikers made of?

Match strikers are typically made from metal, such as copper, brass, iron, or steel. Some are even made from ceramic or porcelain. A match striker is usually a flat metal or ceramic piece with a rough surface for striking matches.

The strikers usually have a shallow indentation for holding the matchbox, and sometimes a small round cut-out to hold the match after it is struck. The striking part of the striker is usually curved to increase its efficacy.

Match striker designs can vary greatly, from plain to ornate. The materials used to make match strikers can also vary greatly.

Can you use sandpaper as a match striker?

Yes, you can use sandpaper as a match striker. However, it is important to remember to use the rougher side of the sandpaper. This is because the gritty surface is what produces the spark when you strike the match against it.

Be sure to use a match that is raw and undipped, as the phosphorus tips have been removed from the match heads in order to make them safer. To use sandpaper as a match striker, simply scrape the match against the rougher side of the sandpaper until a spark is created.

The spark should light the match, allowing you to start a fire.

Are strike on box matches the same as strike anywhere matches?

No, strike on box matches and strike anywhere matches are not the same. Strike on box matches require a special surface on the matchbox to be lit and are usually constructed with an abrasive chemical on the top of the box called a phosphorus sesquisulfide.

This chemical is what helps to ignite the match. By contrast, strike anywhere matches are designed to be lit on almost any rough surface, including paper, wood, and even some clothing. This is done by creating a sulfur-based match tip which is much more flammable than the the chemical on strike on box matches.

Additionally, strike anywhere are usually thicker and longer than strike on box matches and made of a highly flammable wood material.

What is the white tip of strike-anywhere match made of?

The white tip of a strike-anywhere match is made of a combination of phosphorous sesquisulfide and an abrasive element such as powdered glass or quartz. Phosphorous sesquisulfide is a compound that is highly flammable and is responsible for initiating the combustion reaction of a strike-anywhere match.

When match is struck on a rough surface, the phosphorous sesquisulfide on the tip of the match is exposed and the friction generated creates a spark which creates a flame on the tip of the match. The abrasive element, such as the powdered glass or quartz, is critical for the match to work.

This abrasive element is used to create the spark. When a match is struck it creates a tiny shower of sparks that ignite the flammable phosphorous sesquisulfide on the match head and hence, the match lights up.

How do you tell if a match is a safety match?

A safety match can be identified by several characteristics. Firstly, safety matches have a striking surface on the side of the box, usually a red or green phosphorous compound. This is the area that needs to be struck to ignite the match.

Secondly, the matchstick itself is thicker and covered in a sandpaper-like material which gives it a rough, uneven texture when compared to a traditional match. Thirdly, safety matches generally contain a non-poisonous sulfur-based material on the underside of the matchstick that can be ignited with a small spark or friction.

Finally, safety matches typically produce a bright flash or spark when they are lit, while traditional matches will only produce a faint glow or flame.

How are safety matches different?

Safety matches are different from regular matches because they are designed to be a bit safer to use. Regular matches are made with ingredients that are highly flammable, while safety matches are made with ingredients that are less flammable.

To ignite a regular match, you must strike it against a surface that contains sulphur, which causes a spark that is hot enough to ignite the reactive material in the head of the match. Safety matches, on the other hand, require you to use a special ingredient (called phosphorous sesquisulfide) on the matchhead.

This means you can ignite a safety match by simply scratching the head of the match against the specially treated side of the matchbox. This makes it much easier and safer to use. Additionally, the ingredients used in the production of safety matches are not as dangerous as those in regular matches, making them a safer choice.

What can you strike safety matches on?

You can strike safety matches on any type of nonporous surface, such as glass, metal, plastic, and steel. Generally, the back of the matchbox is coated with a type of abrasive material, such as emery, which will give you a suitable surface to strike the safety match against.

However, you can also strike safety matches on other materials, such as natural stone and some types of wood. To do this, you need a rougher surface, such as sandpaper or a rasp, to increase the friction and make it easier to light the match.

Do they still make book matches?

Yes, book matches are still manufactured and sold around the world. Book matches are usually made from a splint of wood or cardboard covered with a combustible substance and a safety paper. The matches are then placed in a matchbook, with the safety paper over the match heads.

Matchbooks are often marketed as promotional items with a company’s branding or logo, and they are typically small enough to fit comfortably in a pocket. Matches are great for lighting anything from a campfire to a candle, and they are easy to use and transport.

Some matches are made with firelighting materials, like sulfur, that give the user multiple ignitions. While the widespread use of lighters and the decline of smoking have caused a decline in the demand for book matches, they are still a useful and cost-effective item for many households and commercial purposes.