Skip to Content

Can you replace an RV toilet?

Yes, the process of replacing an RV toilet isn’t too difficult and can easily be done with the right supplies. The process begins by draining any water that may be left in the toilet and disconnecting the hose connection.

You will then need to remove the screws that hold the toilet to the floor or remove any bolts, depending on the type of toilet you have. The old toilet can then be removed and you can then install the new toilet in the same location.

Be sure to use the same bolts and screws to install the new toilet. Once you have the new toilet securely in place, you can then connect the water supply hose and the vent hose to the back of the new toilet.

You can also replace the wax ring between the toilet base and the flange on the floor. Finally, make sure to check the water supply line for any leaks. With these steps, you’ll be able to easily replace the RV toilet.

Can you replace a Thetford RV toilet with a Dometic RV toilet?

Yes, you can replace a Thetford RV toilet with a Dometic RV toilet. It is important to ensure that all hardware, such as screws and other mounting hardware, are compatible between the two brands. Additionally, the size, shape, and configuration of the base plate, mounting flange, and other components must be carefully considered to ensure an appropriate and secure fit.

For these reasons, it is best to consult with a professional to ensure proper installation. In addition, the plumbing, venting, and wastewater connection must be taken into account, as some of these components may require modification to ensure compatibility between the two toilet brands.

Finally, the size and shape of the bowl must be carefully measured and checked to ensure that it will fit into the existing space, and all of the components must be rated and approved for RV use by the appropriate certifying agency.

What kind of toilet can be used in an RV?

The most common type of toilet used in an RV is known as a “cassette toilet”. This is a standard RV toilet system which utilizes a “holding tank” that collects waste from the toilet bowl and stores it for later disposal.

Cassette toilets also usually come with a special sprayer attachment for easy and hygienic cleaning of the bowl. This type of RV toilet is lightweight and easy to install, although it will require regular emptying and attention to ensure it is properly functioning and hygienic.

Other options for RV toilets include composting toilets, which use natural processes to break down waste, and dry flush toilets, which use a device to use the tiniest amount of water possible in a flushing process.

Ultimately, the type of toilet used in an RV will depend on personal preference and the RV owner’s unique needs and desired functionality.

Can you put a porcelain toilet in an RV?

Yes, you can put a porcelain toilet in an RV. Porcelain is one of the most durable materials for a toilet, so it’s a great choice for an RV. It will last for many years and can withstand the rigors of regular use.

A porcelain toilet is fairly easy to install and can fit in the same space as most RV toilets, although you may need to make some slight modifications to make it fit properly. It is important to ensure the toilet is completely secured to the RV frame and to verify that the plumbing pipes are properly sized to accommodate the larger porcelain toilet.

If you are installing the toilet yourself, be sure to have the right tools and supplies on hand. If you hire a professional to install the toilet, they should be able to do it in a single work day.

How do I know which RV toilet I have?

If you aren’t sure which RV toilet you have, there are several ways to determine it. First, you can look inside the cover of your existing RV toilet to see if the manufacturer name or model number is printed there.

If that information is not available, you can measure the overall outside dimensions of your existing toilet and compare it to the dimensions of available RV toilets to narrow down your options. If all else fails, you can call the manufacturer of your RV and inquire as to what toilet they installed in the vehicle.

This will tell you the brand and model of the toilet that was installed. Once you have determined the brand and model of your existing RV toilet, you can purchase the necessary parts for it.

How often do you need to empty a motorhome toilet?

The frequency with which a motorhome toilet needs to be emptied can vary depending on how much it is used. Generally speaking, a toilet in a motorhome should be emptied once it reaches two-thirds or three-quarters of its capacity.

It is important to note, however, that you may need to empty your motorhome toilet more often if it is seeing frequent use. If the tank is constantly full, you may need to empty it twice a week, or even more often.

Additionally, it is important to keep the sensors clean and free of debris to ensure accurate readings and to minimize the risk of overflowing. Finally, depending on the type of motorhome, you may have a separate tank for black and grey waste; in this case it is important to empty both tanks separately, as needed.

Can you use any toilet with a macerator?

Yes, you can use any toilet with a macerator. The macerator is a device that grinds up solids and liquefies them so they are small enough to pass through small bore pipes. This means that it can be installed with virtually any type of toilet, whether it is a traditional one-piece, two-piece, wall-mounted, or a toilet with an integrated macerator.

It can be installed according to any existing drainage system, whether it is a gravity fed or a pressure-fed system. Installing a macerator also means that you can use less water than would otherwise be necessary for the same task.

By grinding up the waste and liquefying it, the macerator can help to conserve water and reduce wastewater volumes. Ultimately, it can make any toilet more efficient, providing a better flushing experience.

How does a macerator toilet work in an RV?

A macerator toilet works by using a powerful pump system to shred and grind waste material into tiny particles before pumping it to a destination such as a sewer or septic tank. It is an efficient waste disposal system for RV’s, since it can pump waste out of a tank more than 100 feet away, use less water, and get rid of solids, liquids, and paper towels.

The macerator pump pulverizes the waste into slurry, giving it a liquid consistency that can be pumped easily. Then the macerator pump pushes the waste to a destination through a network of hose pipes.

In the RV, the macerator pump is usually mounted near the toilet and is connected to the black water tank. Once the pump is activated, the macerator will move the waste to the tank or designated receptacle.

When the tank or septic receptacle is full, the macerator pump can be shut off, thus preventing an overflow. The macerator also helps reduce odors as well, since the waste materials are broken down into finer particles and are quickly removed.

How much should it cost to replace a toilet?

The cost to replace a toilet will vary depending on several factors, such as the size of the toilet, the type of toilet, the materials (ceramic, plastic, etc. ), and any additional features or upgrades you choose to include.

Costs will also depend on labour costs in the area. Generally, you can expect to pay between $500 and $1000 or more for a toilet replacement. This price range includes the cost of the toilet itself and the labour to install it.

Are RV toilet flange the same as home?

No, RV toilet flange is different from home toilet flange. A typical residential toilet flange is generally made of ABS plastic or PVC and is used in conjunction with a wax ring to seal it to the toilet’s base and the house’s plumbing system.

RV toilet flanges are usually made of polyethylene or polyurethane, are thicker and less prone to cracking than normal home toilet flanges, and much more resilient to flexing and turning than PVC ones.

There is usually a flat gasket built in to the flange for a tight seal. RV toilet flanges are designed to attach to the subfloor with screws, whereas residential flanges are designed to be solvent welded.

Does an RV toilet use a wax ring?

Yes, an RV toilet typically uses a wax ring. A wax ring is used to create a water-tight seal between the toilet and the drain opening, which helps prevent leaking. Wax rings are designed to conform to the shape of the toilet and plumber’s putty is typically used along the base of the toilet to fill any potential gaps.

When installing a toilet in an RV, it is important to ensure that the wax ring is properly secured, with all gaps between the toilet and the drain opening filled to avoid any potential leaks.

How does a gravity flush toilet work?

A gravity flush toilet works by using a combination of gravity and water to remove solid waste from the toilet bowl and drain it into a sewer system. The water that is stored in the tank of a gravity flush toilet is released when the user flushes the handle or button.

This action releases the stored water into the bowl, creating a wave that pushes the waste out of the bowl and down the drain pipe.

The stored water is either released from a float- controlled fill valve or from a float cup mechanism, both of which serves to maintain the tank at the proper water level. When the toilet is flushed, a rubber or silicone seal located in the toilet bowl opens up, allowing the water to exit the tank and travel down the drainpipe.

This motion creates a powerful downward suction that helps to clear solids and liquids quickly and efficiently.

At the same time, gravity is also aiding in the flushing process by causing clean water to enter the bowl from the tank, while pushing out any remaining waste matter down the drain. As the water leaves the bowl and drainpipe, the tank refills with clean water from the fill valve or float cup mechanism, and the cycle begins again.

The gravity flush toilet is a simple but effective design that has been around for decades, and is still used today in many homes as well as in public buildings. It is a reliable and efficient way to dispose of waste in a sanitary manner, and it is easy to maintain and troubleshoot any potential problems associated with it.

Which is better flush valve or gravity feed?

The better choice between a flush valve and a gravity feed ultimately depends on your particular needs. A flush valve is typically used in toilets and other plumbing systems to help regulate the flow of water.

It utilizes a pressure- or vacuum-driven system to create a cyclical action that pushes water through the pipes, helping to flush out waste. The advantage of using a flush valve is that it can deliver a higher pressure of water than a gravity feed, making it better suited to pushing waste through the system without clogs or blockages.

On the other hand, a gravity feed is typically used with shallow wells or holding tanks in order to deliver water from a higher elevation to a lower one. It relies on the forces of gravity to draw water downward and can often be used in conjunction with pumps to create a pressure system for delivering water to the desired location.

Generally, this is done at a lower pressure than a flush valve, but does have the advantage of being able to deliver water over a longer distance.

Ultimately, which system is better for a particular application will depend on the needs of the user. If higher pressure is desired, a flush valve is typically the better choice. If the distance of water delivery is of greater importance, then a gravity feed system may be the better choice.