Skip to Content

How to Remove Velcro Adhesive: Top 13 Best Ideas for You

With its hook and loop design, Velcro has been an amazing match for holding things together safely and perfectly. However, in the case of removing Velcro from a surface such as a wall, clothing, dashboard, or plastic, you may find it a little difficult to complete.

To help you successfully remove Velcro adhesive from all kinds of surfaces, we have the best ideas for how to remove velcro adhesive to help you. Those tips will help you remove Velcro without causing damage. Let’s check out!


1. Choose Plastic Scraper Or Dull Knife, Not The Mental Blade

Scraper Or Dull KnifeWhen it comes to removing Velcro adhesive, you will need to scrape off the tape from the surface. While using a metal blade can easily scratch the surface, you can use a plastic scraper or dull knife to avoid making damage from many surfaces.

Besides, an old gift card can also be a handy tool if you don’t have a plastic scraper or plastic knife.

2. Use Hot Water

Use Hot Water

Hot water is more effective than cold water when dissolving the adhesive.

If you want to soften the adhesive, the best tip is to mix a few drops of the liquid dish with hot water in the sink, then put the item you need to remove the Velcro adhesive into the water. And wait patiently because it might take some time for the residue to soften.

Once the residue softens, you can scarp it more easily with a plastic scraper.

3. Hair Dryer Is Safer Than Heat Gun For Heat Method

Hair Dryer Is Safer Than Heat Gun For Heat Method

One of the most effective options you can use when working on dissolving the adhesive is heat. The theory of using a hairdryer is the same as the hot water – to accelerate the dissolution.

A hairdryer is much safer than using a heat gun. The heat gun might melt the item for its extremely intense heat, especially for nylon material or the plastic backing.

You would better turn the hairdryer on high heat and more it over a section of the adhesive tape slowly and carefully. If you have a steam cleaner, it is also a good tool for using the heat method.

4. Do Not Forget Using Goo Gone Adhesive Remover

Do Not Forget Using Goo Gone Adhesive Remover

Goo Gone is a Citrus-based adhesive remover product. It is designed to dissolving the adhesive on the tape from any surface.

Here is how you can make the most of Goo Gone

  • Pull a corner of the Velcro carefully using a plastic scraper or by hand.
  • Gently slide a knife beneath the tap
  • Add some drops of Goo Gone
  • Wiggle the knife when pulling the Velcro upward
  • Peel the Velcro strips off slowly thereafter
  • Add Goo Gone on the remaining adhesive and wait for the residue to soften
  • Gently rub to dissolve the glue
  • Clean the Velcro adhesive with a clean cloth

Be careful when applying Goo Gone on leather, satin, or sensitive fabrics. You can test a small section to ensure it would not damage the item.

5. Think About Vinegar

Think About Vinegar


Vinegar is too common a supply in the kitchen. The reason you can use vinegar to remove velcro adhesive is that the vinegar typically contains 5–8% acetic acid, which can dissolve the glue.

Do not apply vinegar directly to the item. Use a little water (Hot water is better) to dilute the white vinegar, then immerse the sticker residue into the liquid and leave it soaking for some time. Finally, you will find the residue softens and is easy to move off.

6. Rubbing Alcohol Also Works

Rubbing Alcohol Also Works

Among all the solvents, rubbing alcohol or vodka can also be easily found just around your kitchen. Why not use it to remove velcro adhesive?

Rubbing alcohol works when you need to get sticker residue off plastic, wood, or glass. You just need to wet a clean towel with the alcohol and rub the residue.

Test a small section of the surface first to check if any damage occurs when using an alcohol solution.

7. Remove Velcro Adhesive Using Acetone Nail Polish Remover

Remove Velcro Adhesive Using Acetone Nail Polish Remover

Need more solutions to dissolve the adhesive on the tape? Try nail polish remover!

The nail polish remover method is easy to apply. You just need to saturate a soft cloth in the nail polish remover, then gently rub the residue. Wait for some time and wipe off the residue with a clean cloth or plastic scraper.

8. WD-40 Can Be Useful

WD-40 Can Be Useful

WD-40 is one of the typical solvents when moving velcro adhesive. If you did not remove the residue successfully, you can give the WD-40 a shot.

As a workable solvent, WD-40 could damage some types of surfaces so you would best test it on a small area first.

Once you ensure it is safe to apply WD-40. You can simply wet it with a clean cloth and rub it on the adhesive area.

Remove Velcro Adhesive FAQs

1. How To Remove Hardened Velcro Adhesive?

How To Remove Hardened Velcro Adhesive

Sometimes the velcro adhesive can be tough to remove. Here is how you can deal with hardened adhesive:

The thing you will need

  • l A plastic knife]
  • l Pliers
  • l Krud Kutter Tough Task Citrus Remover ( Or another citrus-based adhesive remover)
  • l A clean cloth

What you should do

  • l Peel one corner of Velcro strip with a plastic knife
  • l Apply krud Kutter tough task citrus remover under the peeled corner
  • l Push the remover deep gradually with the knife
  • l Use a pair of pliers to grip the peeling corner
  • l Pull the strip away from the surface
  • l Add more krud kutter tough task citrus remover
  • l Wait the adhesive softens between the Velcro fabric and surface
  • l Repeat until you can remove the Velcro
  • l Wipe a cloth krud kutter tough task citrus remover
  • l Rub the residue until it softens
  • l Clean the surface with a clean cloth

2. How To Remove Velcro Adhesive From Wall

How To Remove Velcro Adhesive From Wall

Removing Velcro adhesive from the wall can be a little difficult because you may easily peel the paint or damage the drywall. You must use the right solvent to safely remove Velcro adhesive as well as follow the proper steps.

The best solvent you can use is the citrus-based adhesive remover. Once you have the solvent ready, go with the following steps:

  1. l Loosen the edges of the Velcro tape using a razor blade
  2. l Slowly peel the Velcro off the wall
  3. l Wet a cotton swab with citrus-based adhesive remover
  4. l Apply the solvent over the adhesive until it is gone

3. How To Remove Velcro Adhesive From Plastic

How To Remove Velcro Adhesive From Plastic

Remove Velcro adhesive from a surface such as plastic, acrylic or glass is easy. However, before you start, you would best test a little bit on a part of the surface to ensure there will not cause any damage to the surface.

Once you have done the test. You can gather all the supplies together, which are olive oil, coconut oil, goo is gone and WD-40, and begin the work at once!

You can start with spraying the oil over the adhesive. You can even leave it overnight and wait for the adhesive to soften. Then scrap the glue using a card or a cloth and clean the adhesive residue.

4. How To Remove Velcro Adhesive From Fabric

How To Remove Velcro Adhesive From Fabric

We all know that the most important part of removing Velcro adhesive is the solvent. When it comes to deal with clothing, the use of solvent can be more difficult.

You should be more careful and choose the right solvent according to what types of fabric your clothes are because most of the adhesive remover can damage the fabric.

We recommend you using Goo Gone and carefully apply it over the adhesive. If you need a detailed tip, you check How to Remove 8 Glue and Adhesives Stains From Clothes and Carpets.

5. How To Remove Velcro Adhesive From Dashboard

How To Remove Velcro Adhesive From Dashboard

The best and easiest solution to remove Velcro adhesive from the car dashboard is a hairdryer. All you need to do is using the hairdryer to soften the glue so you can easily get off the Velcro.

Once the Velcro is removed, examine the surface for adhesive residue. If you find some residue, you will need the adhesive remover. In this case, WD 40 or Goo Gone can be the best options.

We recommend you apply a bit of the solvent on a corner to have a test first. Let it soak for 10 minutes and if there is no damage happens, then you can remove the glue with a dumping cloth.

In Conclusion

Above are the best ideas on how to remove Velcro adhesive we specially gathered around for you. If you are still bothering those Velcro adhesives, then go ahead and try them out! If you find these ideas helpful, then do not hesitate to share them with your family and friends!

And if you have any other wonderful ideas that can easily remove Velcro adhesive we haven’t listed in the article, feel free to leave us a comment and let us know!